Download ERBE ERBE

8 • Measurement and adjustment
Spark
Test set-up
Testbox
20100-019
Power
S1 DC 70 V
+
-
ECB connection
ERBE
AE
NE
Fig. 8-4
• The test setup is designed as shown in the illustration above.
• The test specimen is connected to the power supply via the power
cord.
• The test specimen is switched on.
• On the PC the "VIO HF Adjustment Tool" software is installed.
Test procedure
1. Perform adjustment step 6 as described in the software.
2. Using the <Continue> button switch to the next test step.
3. Do not switch off the test specimen during rearrangement for
next test step.
56 / 144
Art.-Nr.: 80116-271
01.07
Dok.-Nr: D010050-EN, Ver.: 007, ÄM-Nr: 09088, Gültig ab: 26.02.07, Gedruckt: CDIERL/15.09.08, Ausdruck nicht maßstäblich und kein Original.
Desktop PC