Download Sonicator® Plus 940
Transcript
Sonicator Plus 940 Instruction Manual — Rev. D_07/02/12 Section 1: Introduction 1.1 Introduction to the Sonicator Plus 940 Thank you for purchasing the Sonicator Plus 940 four-channel combination unit for therapeutic ultrasound and muscle stimulation. The microprocessor controlled Sonicator Plus 940 provides interferential (4-pole), premodulated (2-pole interferential), medium frequency (Russian), EMS, high volt, TENS, microcurrent and direct current (DC) waveforms. In addition the Sonicator Plus 940 offers 1 and 3 MHz ultrasound using a dual frequency 5.5 cm² applicator. An optional 0.9 cm² applicator at 1 and 3 MHz is also available. The four–channel Sonicator Plus 940 allows you to utilize up to four different waveforms using four channels simultaneously. You can choose between several different amplitude modulation options such as the surge, reciprocation and vector sweep. The interferential and premodulated modes offer frequency modulation as well as a static frequency option. Figure 1.1— Sonicator Plus 940 The Sonicator Plus provides both a membrane panel and a touch-sensitive screen to allow you to quickly set up treatments. 61 preset treatment setups allow you to quickly set up a treatment that is already in the memory, plus you have room to store up to 80 of your own favorite treatment protocols. In addition, the Sonicator Plus 940 remembers the last treatment that you performed on any stimulation channel or on the ultrasound channel. The Sonicator Plus 940 can provide electrical stimulation only, ultrasound only and combination therapy with the premodulated, TENS, high voltage, microcurrent and DC waveforms. Add one of the two optional treatment carts to create a mobile therapy center for your office. The Sonicator Plus 940 has been certified by Intertek Testing Services to meet the requirements for ETL Listing per the following standards: UL 60601-1 Standard for Safety Medical Electrical Equipment, Part 1: General Requirements for Safety. 5