Download Operator`s Manual - Drucker Diagnostics
Transcript
4 – Operation WARNINGS Blood and body fluids may contain the Hepatitis B virus (HBV), Hepatitis C virus (HCV), human immunodeficiency virus (HIV), or other disease-causing agents. Handle all patient specimens as potential biohazards capable of transmitting infection. Wear appropriate personal protective equipment, including laboratory gloves, when collecting, handling, and processing blood and body fluids. In addition to wearing gloves, the use of disposable lab coats or gowns and protective glasses or goggles is recommended when working around the INSTRUMENT. ACRIDINE ORANGE REAGENT MAY BE TOXIC; DO NOT INGEST. AVOID CONTACT WITH SKIN, EYES, AND CLOTHING. If a tube breaks in the unit, carefully remove THE TUBE with a hemostat or other device, using puncture resistant utility gloves. CONTACT TECHNICAL SERVICES FOR ADDITIONAL INFORMATION. Summary of Operation Steps Routine operation of the QBC Star Hematology System consists of the following steps: • Turn the instrument on • Print out / save electronic controls • Fill tube with blood • Mix the tube of blood • Place the cap onto the tube • Place the tube into the instrument • Close door and ensure it is latched • Push the “Star” button to start the test cycle • Obtain the results from the printer • Dispose of the QBC Star tube in a biohazard sharps container Each of these steps is described below. L–0008674–1