Download 0 - Oldsmobile

To Set Cruise Control
1. Move the cruise control
switch to ON.
To Resume a Set Speed
Suppose you set your cruise control at a desired speed
and then you applythe brake. This, of course, shutsoff
the cruise control. But you don’t needto reset it.
Once you’re going about
25 mph (40 km/h) or more,
you can move the cruise
control switch from ON to
RfA (Resume/Accelerate)
for about half a second.
You’ll go right back up to yourchosen speed and stay
there.
2. Get up to the speed you want.
3. Push in the SET button at the end of the lever and
release it.
4. Take your foot off the accelerator pedal.
If you holdthe switch at R/A longer than half a second,
the vehicle willkeep going faster until you release the
switch or applythe brake. You could be startled and
even lose control. So unless you want to go faster, don’t
hold the switch at R/A.
2-33