Download LASER PRINTER Phaser 3450

Alignment & Adjustments
6.2.1.5 In the Duplex Area
• Duplex Jam 1
1. Open the rear output tray.
3. Close the rear output cover.
2. Remove the jammed paper.
4. Open and close the top cover.Printing can be resumed.
• Duplex Jam 2
1. Pull the paper tray out of the printer.
3. Remove the jammed paper.
2. Pull down the metal plate inside of the printer.
4. Slide the tray back into the printer.
CAUTION : Pulling the plate could cause an injury.Use the
lever on the left.
6-14
Service Manual
5. Open and close the top cover.Printing can be resumed.