Download COURAGE XT-6, XT-7
Transcript
Section 4 Air Cleaner and Air Intake System Section 4 Air Cleaner and Air Intake System Air Cleaner This engine is equipped with a replaceable, high density paper air cleaner. An optional foam precleaner may also be included. See Figure 4-1. Intake air is drawn in through the blower housing, and passes through the precleaner (if equipped), the paper element and then into the carburetor. The outer air cleaner cover is secured by one knob, and removed by turning the knob counterclockwise. Check the air cleaner assembly daily or before starting the engine. Check for any buildup of dirt and debris, as well as loose or damaged components. See Figure 4-1. NOTE: Operating the engine with loose or damaged ȱȱȱȱ ȱęȱ air in, resulting in premature wear and failure. Air Cleaner Element Air Cleaner Cover Air Cleaner Base Optional Foam Precleaner Figure 4-1. Air Cleaner Assembly (Exploded View). Service Precleaner Wash or replace the optional precleaner yearly or every 25 hoursȱȱDzȱȱĞȱȱ extremely dusty or dirty conditions. Follow these instructions to service: 3. Rinse the precleaner thoroughly until all traces of detergent are eliminated. Squeeze out excess water (do not wring), and allow the precleaner to air dry. 4. Reinstall the precleaner. 1. Loosen the air cleaner cover knob and remove the cover. See Figure 4-1. 5. Reinstall the air cleaner cover and tighten the knob securely. 2. Remove the precleaner and wash with detergent in warm water. 4.1 4