1
Download Service Manual
Transcript
Section 6 • Schematics March 2007 Outrigger ECM Pin-out Legend REV A OUTRIGGER ECM PIN-OUT LEGEND C 1 B 1 A 1 12 12 12 Item Description A1 A2 A3 A7 A8 A9 A10 A11 A12 24V C 24V CC Right rear outrigger pressure transducer signal (input) Right front outrigger pressure transducer signal (input) Left rear outrigger pressure transducer signal (input) Left front outrigger pressure transducer signal (input) 2 axis tilt level sensor - pitch S8 (input) 2 axis tilt level sensor - roll S8 (input) Outrigger data link (high) (input) Outrigger data link (lo) (input) Power for platform controller (output) Ground for platform controller (output) B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 Outrigger ECM ground (input) Plug Plug Motor controller throttle (output) Motor controller enable (input) Height limit signal (input) Down limit switch LS66 (input) Key switch KS1 (input) Up signal from Gen 5 ECM U5 (input) Drive reverse Y5 (input) Drive forward Y6 (input) 24V A C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 24V B Plug Outrigger retract Y39 (output) Outrigger extend Y40 (output) Left front outrigger Y35 (output) Right front outrigger Y36 (output) Left rear outrigger Y33 (output) Right rear outrigger Y34 (output) Motor controller enable (output) Outrigger transducer, 2 axis tilt level sensor S8 and up limit switch LS5A power (output) Platform up Y8 (output) Drive enable A4 A5 A6 C11 C12 Part No. 97385 GS-30 • GS-32 • GS-46 6-5
