Download The SHTP Return Trip

Transcript
Using the Crossover Bleeding System 1
• Fuel Filter replacement is very easy with a Crossover
Bleeding System.
• When engine is shut down, there is no air in the line
from the 4 way cross to the engine.
• Crack the filter top and drain fuel from filter into a
Nalgene Bottle and remove the old filter. A plastic bag
contains the mess. If the filter body is very dirty, clean
it. A stiff wire may be helpful to get muck out. Use
decanted “clean” fuel from bottle to flush crap out of
the filter body. Close drain before flushing from bottle.
• Cap the Nalgene bottle and insert a new 10 micron
filter. Close the drain port!!
• Replace the cap (use the new O ring!).
2/12/2014
Michael Jefferson; SSS TransPac Seminar 2014
9