Download Technical Service Manual
Transcript
12 Testing the Pressure Regulator • Connect the inspiratory socket with the expiratory socket. • Adjust the device as shown in the Figure below CPAP 30 15 Flow sensor cable Fig. 7: Pressure Regulator • Connect the device to the O2 supply only. The following message is displayed on the device: “no medical air”. • Connect the device to the medical AIR supply only. GBK61733XXTL1.fm 07.07.05 For internal use only. Copyright reserved. The following message is displayed on the device: “no oxygen”. 6173.3 Babylog 8000/8000 plus/8000 SC 12/00 General Page 13