Download SERVICE MANUAL

3. LED is in short circuit or the
cord is disconnected.
Some LED
units is bad.
Remove the short circuit faults or connect
the cord.
Change the LED strip.
Remark:
1. LED Power Supply.
2. First step, turn the Defrost Timer clockwise, until you hear "da", this means the
machine is in defrosting.
It will work for about 20min, and then will stop automatic.
If after fist step, the problem is still exit. Please do second step.
Second step: Power off, open the door. It need 4~5hours to melt the ice on Eva.