Download VTP Rem W
Transcript
STARTUP Error code E1 E2 E3 E4 Error type Notes Alarm (not provided for these units) Alarm (not provided for these units) Alarm Alarm E7 Electrical resistance error Coil probe T2 error Ambient air probe error Coil probe T1 error Protection for exchanger temperature too low Protection for exchanger temperature too high Flow switch error E8 Communication error Alarm E5 E6 Temporary protection Temporary protection Alarm (not provided for these units) Actions* \ \ Call the After-Sales Service Call the After-Sales Service If the alarm does not disappear call the After-Sales Service If the alarm does not disappear call the After-Sales Service \ If the alarm does not disappear call the After-Sales Service * some alarms can be generated by inadequate routine maintenance. Make sure to carry out this procedure before calling the After-Sales Service. Fig. 5 UNIT ERRORS DISPLAY If an error condition occurs during unit operation, this condition will be displayed by flashing of LED 4 on the panel. Depending on the number of flashes is possible to identify the cause of the error. To interpret the error codes, use the table below: No. flashes 1 2 3 4 5 6 9 Error type Notes Electrical resistance error Coil probe T2 error Ambient air probe error Coil probe T1 error Protection for exchanger temperature too low Protection for exchanger temperature too high Alarm (not provided for these units) Alarm (not provided for these units) Alarm Alarm Fan motor error Temporary protection Temporary protection Temporary protection Actions* \ \ Call the After-Sales Service Call the After-Sales Service If the alarm does not disappear call the After-Sales Service If the alarm does not disappear call the After-Sales Service If the alarm does not disappear call the After-Sales Service * some alarms can be generated by inadequate routine maintenance. Make sure to carry out this procedure before calling the After-Sales Service. How to interpret the number associated with the flashes. 3 sec The (Fig. 2) indicates the sequence of 3 flashes separated by a 3-second pause. 13