Download the possibilities

Middle nozzle
1.
Pull the upper rack towards
remove it.
2. Check whether
clogged
3.
the front and
the nozzle holes are
by food particles.
If cleaning
is needed,
remove the nozzle.
4. To remove the nozzle, unfasten and
remove the nut, and then remove the
nozzle.
5. Clean the nozzle, re-insert it, and fasten
the nut.
6. When fastening
hand.
the nut, turn it firmly by
7. Check whether the nozzle is engaged
correctly by rotating it by hand.
Upper nozzle
1. Check whether
clogged
2.
the nozzle holes are
by food particles.
If cleaning
is needed,
remove the nozzle.
3. To remove the nozzle, pull out the upper
rack first, unfasten the nozzle cap by
turning it counterclockwise,
and then
remove the upper nozzle.
4. Clean the nozzle, re-insert it, and then
fasten the nozzle cap to the nozzle by
turning the cap clockwise.
5. Check whether the nozzle is engaged
correctly by rotating it by hand.
STORING YOUR DISHWASHER
If you need to store your dishwasher
for an extended
leave water in the hoses and internal components,
After draining and disconnecting
breaker.
the dishwasher,
period of time, first drain and disconnect
be sure to turn off the water
supply valve and circuit
cleaning
DW80F600
DDS1-01555A-01
£N.indd
Sec5:21
it. If you
you can damage the dishwasher.
and maintaining
21
2013-06-04
_7
11:27:00
I