Download RM-P2580

1. INTRODUCTION
FEATURES
Presetting of up to 100 positions (including the home positions) each, for up to 8 combination cameras.
Built-in PAN, TILT and ZOOM control for up to 8 cameras.
RS-485 connection system enables cascaded connection of cameras.
Built-in sequential switcher.
Alarm input terminals.
Data I/O terminals for interlocked operation with external peripherals.
ACCESSORIES
R
INTRODUCTION
BASIC OPERATIONS
REMOTE CONTROL UNIT
APPLIED OPERATIONS
FERNBEDIENUNGSEINHEIT
COMMANDE A DISTANCE
CONNECTIONS
RM-P2580
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D'INSTRUCTIONS
MENU SCREEN SETUPS
OTHER
REMOTE
RM-P2000
UNIT
UNIT
CONTROL
REMOTECONTROL
RM-P2580
SETUP
SETUP
MENU
SET
SET
AUTO
AUTO
FOCUS
FOCUS
AF
AF
ZOOM
ZOOM
00
/ALL
/HOME
66
55
88
77
CLEAR
CLEAR
33
22
11
44
OPEN
OPEN
FAR
FAR
TELE
TELE
99
CAMERA
CAMERA
HOME
OPTION
1
AUTO
AUTO
PAN
PAN
F-1
F-1
F-2
F-2
F-3
F-3
PAN/TILT
PAN/TILT
CAMERA/POSITION
CAMERA/POSITION
LENS
SPEED
SPEED
IRIS
IRIS
CLOSE
CLOSE
NEAR
NEAR
WIDE
WIDE
POSITION
POSITION
CAMERA
CAMERA
POWER
POWER
ALARM
ALARM
KEY LOCK
KEY LOCK
POSIPOSITION
TION
FUNCOPTION
TION
2
PRESET
AUTO
SEQ
PATROL
ENTER
ENTER
SC96859-001
Power cord (2 m)
Ferrite Core
Instructions (this manual)
PRECAUTIONS FOR PROPER OPERATION
Do not install the unit in a place subject to direct sunlight,
excessive moisture, dust, or vibrations where ventilation is
poor.
Be careful of strong radio waves and magnetism:
If the unit is near a source of strong magnetism, such as a
radio or TV transmission antenna, power transformer or
motor, the video signal may be subject to interference.
Always use the power cord provided with or specified for
this unit.
CLEAN EXTERIOR
● Wipe gently with a soft cloth.
● Put cloth in diluted mild soap and wring it well to wipe off
heavy dirt. Then wipe again with a dry cloth.
To save energy, be sure to turn off the system when not in
use.
Precautions for the PRESET SEQUENCE and AUTO PAN Operations
The life-span of the PRESET SEQUENCE and AUTO PAN
functions is dependent on which camera model is used in
combination with this unit.
When using the TK-C655 and TK-C676 cameras, the guaranteed zoom lens operation count is 200,000 times. If the
zoom lens operation is used often, the life-span of the PRESET SEQUENCE and AUTO PAN functions may be much
less than expected.
(Example) Assuming that a ZOOM operation is performed
every minute and the camera is used 24 hours
a day:
200,000 x 2 (times) ÷ 60 (minutes) ÷ 24 (hours) = 277 (days)
Total operations count
Daily operating hours
For other camera models, please refer to the Handling &
Installation Instructions manuals of the camera in use.
E-4
RM-P2580E-E
4
03.4.22, 10:20 AM