Download procedure

Interfaces and software update
Chapter 6
6.1.2
OPERATION MANUAL
USB-2.0 interface
The interfaces used must meet the specifications of the generally accepted standards.
6.1.2.1
USB-2.0 interface, host
USB-2.0 connection (for connector A), e.g. for data memories.
6.1.2.2
USB-2.0 interface, device
USB-2.0 connection (for Mini-B connector) for communicating with a computer.
6.2
Interfaces at the back
Standard interfaces at
the back
6.2.1
Service interface
This interface is used by the service engineers of Peter Huber Kältemaschinenbau GmbH exclusively
for service purposes. An adapter cable connects this interface to a RS232 serial jack.
6.2.2
RS232 (option) / activation of cooling bath
This connector is used to connect the hanger thermostat with the cooling bath. This enables control
of the cooling bath via the hanger thermostat.
6.3
Firmware update
An instruction for running a firmware update can be found at www.huber-online.com.
V1.3.0en/12.05.15//14.06
Liability for errors and misprints excluded.
BFT®
55