Download service manual 32l-s400, 36l-s400 cl32s40, cl36s40
Transcript
32L-S400, 36L-S400 CL32S40, CL36S40 SERVICE MANUAL S39E632L-S400 COLOR TELEVISION Chassis No. SN-92 MODELS 32L-S400, 36L-S400 CL32S40, CL36S40 In the interests of user-safety (Required by safety regulations in some countries ) the set should be restored to its original condition and only parts identical to those specified should be used. CONTENTS Page » ELECTRICAL SPECIFICATIONS ......................................................................................................... 1 » IMPORTANT SERVICE SAFETY PRECAUTION ................................................................................. 2 » LOCATION OF USER'S CONTROL ..................................................................................................... 6 » INSTALLATION AND SERVICE INSTRUCTIONS ................................................................................ 7 » CHASSIS LAYOUT ............................................................................................................................. 13 » BLOCK DIAGRAM ............................................................................................................................. 14 » SCHEMATIC DIAGRAMS ................................................................................................................... 15 » PRINTED WIRING BOARD ASSEMBLIES ........................................................................................ 27 » REPLACEMENT PARTS LIST............................................................................................................ 31 » PACKING OF THE SET ...................................................................................................................... 42 ELECTRICAL SPECIFICATIONS POWER INPUT ..................................................... 120V AC 60 Hz POWER RATING 32L-S400, CL32S40 .......................................................... 140W 36L-S400, CL36S40 .......................................................... 165W PICTURE SIZE 32L-S400, CL32S40 ................................ 3,073cm2 (476sq inch) 36L-S400, CL36S40 ................................ 3,905cm2 (605sq inch) CONVERGENCE ............................................................. Magnetic SWEEP DEFLECTION ..................................................... Magnetic FOCUS ................................................ Hi-Bi-Potential Electrostatic INTERMEDIATE FREQUENCIES Picture IF Carrier Frequency ..................................... 45.75 MHz Sound IF Carrier Frequency ...................................... 41.25 MHz Color Sub-Carrier Frequency ..................................... 42.17 MHz (Nominal) SHARP CORPORATION AUDIO POWER OUTPUT RATING .............. 2.5W + 2.5W (at 10% distortion and Dual CH Operate) SPEAKER SIZE ............................................................... 12 x 6 cm (2 pcs.) VOICE COIL IMPEDANCE ............................... 8 ohm at 400 Hz ANTENNA INPUT IMPEDANCE VHF/UHF .................................................... 75 ohm Unbalanced TUNING RANGES VHF-Channels .............................................................. 2 thru 13 UHF-Channels ............................................................ 14 thru 69 CATV Channels ........................................................... 1 thru 125 (EIA, Channel Plan U.S.A.) Specifications are subject to change without prior notice. This document has been published to be used for after sales service only. 1 The contents are subject to change without notice. 32L-S400, 36L-S400 CL32S40, CL36S40 IMPORTANT SERVICE SAFETY PRECAUTION Ë Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow: WARNING X-RADIATION AND HIGH VOLTAGE LIMITS 1. For continued safety, no modification of any circuit should be attempted. 2. Disconnect AC power before servicing. 3. Semiconductor heat sinks are potential shock hazards when the chassis is operating. 4. The chassis in this receiver has two ground systems which are separated by insulating material. The nonisolated (hot) ground system is for the B+ voltage regulator circuit and the horizontal output circuit. The isolated ground system is for the low B+ DC voltages and the secondary circuit of the high voltage transformer. To prevent electrical shock use an isolation transformer between the line cord and power receptacle, when servicing this chassis. 1. Be sure all service personnel are aware of the procedures and instructions covering X-radiation. The only potential source of X-ray in current solid state TV receivers is the picture tube. However, the picture tube does not emit measurable X-Ray radiation, if the high voltage is as specified in the "High Voltage Check" instructions. It is only when high voltage is excessive that Xradiation is capable of penetrating the shell of the picture tube including the lead in the glass material. The important precaution is to keep the high voltage below the maximum level specified. 2. It is essential that servicemen have available at all times an accurate high voltage meter. The calibration of this meter should be checked periodically. 3. High voltage should always be kept at the rated value −no higher. Operation at higher voltages may cause a failure of the picture tube or high voltage circuitry and;also, under certain conditions, may produce radiation in exceeding of desirable levels. 4. When the high voltage regulator is operating properly there is no possibility of an X-radiation problem. Every time a colour chassis is serviced, the brightness should be tested while monitoring the high voltage with a meter to be certain that the high voltage does not exceed the specified value and that it is regulating correctly. 5. Do not use a picture tube other than that specified or make unrecommended circuit modifications to the high voltage circuitry. 6. When trouble shooting and taking test measurements on a receiver with excessive high voltage, avoid being unnecessarily close to the receiver. Do not operate the receiver longer than is necessary to locate the cause of excessive voltage. 5A 125V CAUTION: FOR CONTINUED PROTECTION AGAINST A RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 5A125V FUSE. SERVICING OF HIGH VOLTAGE SYSTEM AND PICTURE TUBE When servicing the high voltage system, remove the static charge by connecting a 10k ohm resistor in series with an insulated wire (such as a test probe) between the picture tube ground and the anode lead. (AC line cord should be disconnected from AC outlet.) 1. Picture tube in this receiver employs integral implosion protection. 2. Replace with tube of the same type number for continued safety. 3. Do not lift picture tube by the neck. 4. Handle the picture tube only when wearing shatterproof goggles and after discharging the high voltage anode completely. 2 32L-S400, 36L-S400 CL32S40, CL36S40 IMPORTANT SERVICE SAFETY PRECAUTION (Continued) • Connect the resistor connection to all exposed metal parts having a return to the chassis (antenna, metal cabinet, screw heads, knobs and control shafts, escutcheon and etc.) and measure the AC voltage drop across the resistor. AII checks must be repeated with the AC ine cord plug connection reversed. (If necessary, a nonpolarized adapter plug must be used only for the purpose of completing these check.) Any current measured must not exceed 0.5 milliamp. Any measurements not within the limits outlined above indicate of a potential shock hazard and corrective action must be taken before returning the instrument to the customer. BEFORE RETURNING THE RECEIVER (Fire & Shock Hazard) Before returning the receiver to the user, perform the following safety checks. 1. Inspect all lead dress to make certain that leads are not pinched or that hardware is not lodged between the chassis and other metal parts in the receiver. 2. Inspect all protective devices such as non-metallic control knobs, insulating materials, cabinet backs, adjustment and compartment covers or shields, isolation resistor-capacity networks, mechanical insulators, etc. 3. To be sure that no shock hazard exists, check for leakage current in the following manner. • Plug the AC cord directly into a 120 volt AC outlet, (Do not use an isolation transformer for this test). • Using two clip leads, connect a 1.5k ohm, 10 watt resistor paralleled by a 0.15µF capacitor in series with all exposed metal cabinet parts and a known earth ground, such as electrical conduit or electrical ground connected to earth ground. • Use an AC voltmeter having with 5000 ohm per volt, or higher, sensitivity to measure the AC voltage drop across the resistor. 1.5k ohm 10W 0.15µF TEST PROBE TO EXPOSED METAL PARTS CONNECT TO KNOWN EARTH GROUND 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 SAFETY NOTICE Many electrical and mechanical parts in television receivers have special safety-related characteristics. These characteristics are often not evident from visual inspection, nor can protection afforded by them be necessarily increased by using replacement components rated for higher voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in this manual; electrical components having such features are identified by "å" and shaded areas in the Replacement Parts Lists and Schematic Diagrams. For continued protection, replacement parts must be identical to those used in the original circuit. The use of substitute replacement parts which do not have the same safety characteristics as the factory recommended replacement parts shown in this service manual, may create shock, fire, X-radiation or other hazards. 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 3 32L-S400, 36L-S400 CL32S40, CL36S40 PRECAUTIONS A PRENDRE LORS DE LA REPARATION Ë Ne peut effectuer la réparation qu' un technicien spécialisé qui s'est parfaitement accoutumé à toute vérification de sécurité et aux conseils suivants. AVERTISSEMENT LIMITES DES RADIATIONS X ET DE LA HAUTE TENSION 1. N'entreprendre aucune modification de tout circuit. C'est dangereux. 2. Débrancher le récepteur avant toute réparation. 3. Les déversoirs thermiques à semi-conducteurs peuvent présenter un danger de choc électrique lorsque le réceqteur est en marche. 4. Le châssis de ce récepteur possède deux systèmes de masse qui sont séparées par du matériel d'isolation. Le système de masse non-isolée (sous tension) est pour le circuit du régulateur de tension B+ et le circuit de sortie horizontale. Le système de masse isolée est pour les tensions DC B+ basses et le circuit secondaire du transformateur haute tension. Pour éviter tout risque d'électrocution lors de l'entretien de ce châssis, utiliser un transformateur d'isolation entre le cordon de ligne et la prise de courant. 5A 125V 1. Tout le personnel réparateur doit être instruit des instructions et procédés relatifs aux radiations X. Le tube-image, seule source de rayons X dons les téleviseurs transistorisés, n'émet pourtant pas de rayons mesurables si la haute tension est maintenue à un niveau préconisé dans la section "Vérification de la haute tension". C'est seulement quand la haute tension est excessive que les rayons X peuvent entrer dans l'enveloppe du tube-image y compris le conducteur de verre. Il est important de maintenir la haute tension en-dessous du niveau spécifié. 2. Il est essentiel que le réparateur ait sous la main un voltmètre à haute tension qui doit être périodiquement étalonné. 3. La haute tension doit toujours être maintenue à la valeur de régime -et pas plus haute. L'opération à des tensions plus élevées peut entraîner une panne du tube-image ou du circuit à haute tension et, dans certaines conditions, peut entraîner une radiation dépassant les niveaux préscrits. 4. Quand le régulateur à haute tension fonctionne correctement, il n'y a aucun problème de radiation X. Chaque fois qu'un châssis couleurs est réparé, la luminosité doit être examinée bout en contrôlant la haute tension à l'aide d'un voltmètre pour s'assurer que la haute tension ne dépasse pas la valeur spécifiée et qu'elle soit correctement réglée. 5. Ne pas utiliser un tube-image autre que celui spécifié et ne pas effectuer de modifications déconseillées du circuit à haute tension. 6. Lors de la recherche des pannes et des mesures d'essai sur un récepteur qui présente une haute tension excessive, éviter de s'approcher inutilement du récepteur. Ne pas faire fonctionner le récepteur plus longtemps que nécessaire pour localiser la cause de la tension excessive. PRECAUTION: POUR LA PROTECTION CONTINUE CONTRE LES RISQUES D'INCENDIE, REMPLACER LE FUSIBLE PAR UN FUSIBLE DE MEME TYPE 5A-125V. REPARATION DU SYSTEME A HAUTE TENSION ET DU TUBE-IMAGE Lors de la réparation de ce systéme, supprimer la charge statique en branchant une résistance de 10 kΩ en série avec un fil isolé (comme une sonde d'essai) entre la mise à la terre du tube-image et le fil d'anodel. (Le corden d'alimentation doit être retiré de la prise murale.) 1. Le tube image dans ce récepteur emploie une protection intégrée contre l'implosion. 2. Par mesure de sécurité, changer le tube-image pour un tube du même numéro de type. 3. Ne pas lever le tube-image par son col. 4. Ne manipuler le tube-image qu'en porant des lunettes incassables et qu'après avoir déchargé totalement la haute tension. 4 32L-S400, 36L-S400 CL32S40, CL36S40 PRECAUTIONS A PRENDRE LORS DE LA REPARATION (Suite) • Toucher avec la sonde d'essai les pièces métalliques exposées qui présentent une voie de retour au châssis (antenne, coffret métallique, tête des vis, arbres de commande et des boutons, écusson, etc.) et mesurer la chute de tension CA en-travers de la résistance. Toutes les vérifications doivent être refaites après avoir inversé la fiche du cordon d'alimentation. (Si nécessaire, une prise d'adpatation non polarisée peut être utilisée dans le but de terminer ces vérifications.) Tous les courants mesurés ne doivent pas dépasser 0,5 mA. Dans le cas contraire, il y a une possibilité de choc électrique qui doit être supprimée avant de rendre le récepteur au client. VERIFICATIONS CONTRE L'INCEN-DIE ET LE CHOC ELECTRIQUE Avant de rendre le récepteur à l'utilisateur, effectuer les vérifications suivantes. 1. Inspecter tous les faisceaux de câbles pour s'assurer que les fils ne soient pas pincés ou qu'un outil ne soit pas placé entre le châssis et les autres pièces métalliques du récepteur. 2. Inspecter tous les dispositifs de protection comme les boutons de commande non-métalliques, les isolants, le dos du coffret, les couvercles ou blindages de réglage et de compartiment, les réseaux de résistance-capacité, les isolateurs mécaniques, etc. 3. S'assurer qu'il n'y ait pas de danger d'électrocution en vérifiant la fuite de courant, de la facon suivante: • Brancher le cordon d'alimentation directem-ent à une prise de courant de 120V (Ne pas utiliser de transformateur d'isolation pour cet essai). • A l'aide de deux fils à pinces, brancher une résistance de 1,5 kΩ 10 watts en parallèle avec un condensateur de 0,15µF en série avec toutes les pièces métalliques exposées du coffret et une terre connue comme une conduite électrique ou une prise de terre branchée à la terre. • Utiliser un voltmètre CA d'une sensibilité d'au moins 5000Ω/V pour mesurer la chute de tension en travers de la résistance. Voltmètre CA 1.5k ohm 10W 0.15µF SONDE D'ESSAI TEST PROBE AUX PIECES TO EXPOSED METALLIQUES METAL PARTS EXPOSEES BRANCHER A TO UNE CONNECT TERRE CONNUE KNOWN EARTH GROUND 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 AVIS POUR LA SECURITE identifiées par la marque " å " et hachurées dans la liste des pièces de remplacement et les diagrammes schématiques. Pour assurer la protection, ces pièces doivent être identiques à celles utilisées dans le circuit d'origine. L'utilisation de pièces qui n'ont pas les mêmes caractéristiques que les pièces recommandées par l'usine, indiquées dans ce manuel, peut provoquer des électrocutions, incendies, radiations X ou autres accidents. De nombreuses pièces, électriques et mécaniques, dans les téléviseurs présentent des caractéristiques spéciales relatives à la sécurité, qui ne sont souvent pas évidentes à vue. Le degré de protection ne peut pas être nécessairement augmentée en utilisant des pièces de remplacement étalonnées pour haute tension, puissance, etc. Les pièces de remplacement qui présentent ces caractéristiques sont identifiées dans ce manuel; les pièces électriques qui présentent ces particularités sont 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 5 32L-S400, 36L-S400 CL32S40, CL36S40 LOCATION OF USER'S CONTROL 6 32L-S400, 36L-S400 CL32S40, CL36S40 INSTALLATION AND SERVICE INSTRUCTIONS Note: (1) When performing any adjustments to resistor controls and transformers use non-metallic screwdrivers or TV alignment tools. (2) Before performing adjustments, the TV set must be on at least 15 minutes. CIRCUIT PROTECTION HIGH VOLTAGE CHECK The receiver is protected by a 5.0A fuse (F701), mounted on PWB-A, wired into one side of the AC line input. High voltage is not adjustable but must be checked to verify that the receiver is operating within safe and efficient design limitations as specified checks should be as follows: X-RADIATION PROTECTOR CIRCUIT TEST 1. Connect an accurate high voltage meter between ground and anode of picture tube. 2. Operate receiver for at least 15 minutes at 120V AC line voltage, with a strong air signal or a properly tuned in test signal. 3. Enter the service mode and select the service adjustment "S19" and Bus data "01" (Y-mute on). 4. The voltage should be approximately 32.8kV(32LS400, CL32S40)/33.4kV(36L-S400, CL36S40) (at zero beam). If a correct reading cannot be obtained, check circuitry for malfunctioning components. After the voltage test, make Y-mute off to the normal mode. After service has been performed on the horizontal deflection system, high voltage system, B+ system, test the X-Radiation protection circuit to ascertain proper operation as follows: 1) Apply 120V AC using a variac transformer for accurate input voltage. 2) Allow for warm up and adjust all customer controls for normal picture and sound. 3) Receive a good local channel. 4) Connect a digital voltmeter to TP653 and make sure that the voltmeter reads 13.8 ±0.7V (32L-S400, CL32S40)/13.2 ± 0.7V(36L-S400, CL36S40). 5) Apply external 17.0V DC (32L-S400, CL32S40)/ 16.2V DC (36L-S400, CL36S40) at TP653 by using an external DC supply, TV must be shut off. 6) To reset the protector, unplug the AC cord and plug the AC cord power on. Now make sure that normal picture appears on the screen. 7) If the operation of the horizontal oscillator does not stop in step 5, the circuit must be repaired before the set is returned to the customer. 7 32L-S400, 36L-S400 CL32S40, CL36S40 For adjustments of this model, the bus data is converted to various analog signals by the D/A converter circuit. Note: There are still a few analog adjustments in this series such as focus and master screen voltage. Follow the steps below whenever the service adjustment is required. See "Table-B" to determine, if service adjustments are required. 1. Service mode To enter the service mode and exit service mode. Before putting unit into the service mode, check that customer adjustments are in the normal mode. Use the reset function in the video adjustment menu to ensure customer controls are in their proper (reset) position. While pressing the Vol-up and Ch-up buttons at the sametime, plug the AC cord into a wall socket. Now the TV set is switched on and enters the service mode. To exit the service mode, turn the television off by pressing the power button. 2. Service number selection Once in the service mode, press the Ch-up or Chdown button on the remote controller or at the set. The service adjustment number will vary in increments of one, from "S01" to "P07". Select the item you wish to adjust. 3. Data number selection Press the Vol-up or down button to adjust the data number. DATA NUMBER CHANNEL SERVICE ADJUSTMENT NUMBER S01 55(085) 02 S01 D:00 Figure A. 8 32L-S400, 36L-S400 CL32S40, CL36S40 SERVICE NUMBER S01 S02 S03 S04 S05 S06 S07 S08 S09 S10 S11 S12 S13 S14 S15 S16 S17 S18 S19 S20 S21 S22 S23 OP M01 M02 M03 M04 M05 P01 P02 P03 P04 P05 P06 P07 DATA ADJUSTMENT ITEM ADJUSTMENT CONTENTS RANGE INITIAL VALUE PICTURE TINT COLOR BRIGHTNESS SHARPNESS Vert. PHASE Hor. PHASE RF AGC Vert. AMPLITUDE PIF VCO R CUT-OFF G CUT -OFF B CUT-OFF G GAIN B GAIN TRAP BALANCE CC POSITION MUTE ENERGY SAVE OFFSET D.D.E. OFFSET OSD SETUP TUNER SETUP OPTION INPUT LEVEL ST VCO FILTER WIDE BAND SPECTRAL PIP Y-LEVEL PIP TINT PIP COLOR PIP Y-OFFSET PIP H-POSI. PIP BGPM PP FREERUN 55 46 32 40 28 00 12 23 20 2C 00 00 00 7F 7F 0 20 17 00 20 03 00 00 30 0A 20 1C 20 1B 30 29 2E 09 0A 00 0B 00-7F 00-7F 00-7F 00-7F 00-3F 00-07 00-1F 00-3F 00-3F 00-7F 00-FF 00-FF 00-FF 00-FF 00-FF 00,01 00-3F 00-7F 00,01,03 00-3F 00-1F 00-03 00,01 00-FF 00-0F 00-3F 00-3F 00-3F 00-3F 00-7F 00-3F 00-7F 00-1F 00-FF 00-0F 00-0F Must be set to "24" Must be set to "00" Must be set to "01" Must be set to "20" "00" : NORMAL, "01" : Y-MUTE, "03" : V-STOP & Y-MUTE Must be set to "23" Must be set to "03" Must be set to "00" Must be set to "00" Must be set to "FE" Must be set to "29" Must be set to "09" Must be set to "0A" Must be set to "00" Must be set to "0B" Table - A Holding down both the CH-up/down buttons on the TV set at service mode for more than 2 seconds will automatically write the above initial values into IC2101. ADJUSTMENT PART REPLACED NECESSARY X IC2001 IC201 NOTES UNNECESSARY Data is stored in IC2101. The adjustment is needed to compensate for characteristics of parts including IC201 and MTS level (M01). X Holding down both the CH-up/down bottons on the TV set in the service mode for more than 2 seconds will automatically write the above initial values into IC2101. Then perform a complete adjustment. IC2101 X CRT Adjust items related to picture tube only. IC3001 X X IC1801 X Adjust items related to P-IN-P only (P01~P07). Adjust items related to MTS only (M01~M05). Table - B 9 32L-S400, 36L-S400 CL32S40, CL36S40 Ë SERVICE ADJUSTMENT VCO Adjustment White Balance Adjustment 1. Connect a digital voltmeter between pin (44) of IC201 and ground. 2. Receive a good local channel. 3. Enter the service mode and select the service adjustment "S10". 4. Adjust the data so that digital voltmeter reads 2.2V. 5. Adjustment is completed, remove the voltmeter, return to "normal" mode. 1. Receive a good local channel. 2. Enter the service mode and select the service adjustment "S03" and set to "00" (minimum color)(Record original data code under adjustment "S03" before changing). "S03" does not have to be adjusted, if you selected a B/W picture or monoscope pattern. 3. Alternately adjust the service adjustment data of "S14" and "S15" until a good grey scale with normal whites is obtained. 4. Select the service adjustment "S03" and adjust data to obtain normal color level. RF AGC Adjustment 1. Receive a good local channel. 2. Enter the service mode and select the service adjustment "S08". 3. Set the data value to point where no noise or beat appears. 4. Select another channel to confirm that no noise or beat appears. Note 1 : You will have to come out of the service mode to select another channel. Note 2 : Setting the data to "00" will produce a black raster. Sub-Picture Adjustment 1. Receive a good local channel. 2. Make sure the customer picture control is set to maximum. 3. Enter the service mode and select the service adjustment "S01". 4. Adjust the data value to achieve normal contrast range. Screen Adjustment Sub-Tint Adjustment 1. Receive a good local channel. 2. Enter the service mode and select the service adjustment "S03" and set the data value to "00" to set the color level to minimum. (Record original data code under adjustment "S03" before changing) You may skip this step, if you selected a B/W picture or monoscope pattern. 3. Select the service adjustment "S19" and adjust the data value to "01", this turn off the luminance signal (Y-mute). 4. Select the service adjustment "S04" and adjust data value to "4B". 5. Adjust the master screen cotrol until the raster darkens to the point where raster is barely seen. 6. Adjust the service adjustments "S11" red, "S12" green and "S13" blue to obtain a good grey scale with normal whites at low brightness level. 7. Select the service adjustment "S19" and reset data to "00". Select the service adjustment "S03" and reset data to obtain normal color level. 8. Reset the master screen control to obtain normal brightness range. 1. Receive a good local channel. 2. Set customer tint control to center of it's range. 3. Enter the service mode and select the service adjustment "S02". 4. Adjust "S02" data value to obtain normal flesh tones. Sub-Color Adjustment 1. Receive a good local channel. 2. Make sure the customer color control is set to center position . 3. Enter the service mode and select service adjustment "S03". 4. Adjust "S03" data value to obtain normal color level. 10 32L-S400, 36L-S400 CL32S40, CL36S40 Sub-Brightness Adjustment 3.58MHz Trap Adjustment 1. Receive a good local channel. 2. Make sure the customer brightness control is set to center position. 3. Enter the service mode and select the service adjustment "S04". 4. Adjust "S04" data value to obtain normal brightness level. 1. Receive a good local channel. 2. Enter the service mode and select the service adjustment "S16". 3. This is a two position adjustment, "00" is ON, "01" is OFF. 4. Adjust data value to "01" for normal viewing. Sharpness and Audio Balance Adjustments Vertical-Size and Linearity Adjustments 1. Receive a good local channel. 2. Enter the service mode and select the service adjustments "S05" for sharpness and "S17" for audio balance. » Sharpness adjustment 3. Adjust data value to "24"(center of data range) for sharpness adjustment. » Audio balance adjustment 4. Adjust data value to "20"(center of data range) for Audio balance adjustment. 1. Receive a good local channel. 2. Enter the service mode and select the service adjustment "S09". 3. While observing the top and bottom of the screen, adjust "S09" data value to proper vertical size. 4. Using the R502 control adjust for the best linearity. Vertical Phase Adjustment 1. Enter the service mode and select the service adjustment "S06". 2. Adjust data value to "00". Note: This must be set "00" when changed data retrace line will appear. Vertical Center Adjustment 1. Receive a good CATV channel. 2. Adjust the S502 so that the picture is centered. Horizontal Position Adjustment Side Pincushion Adjustment 1. Receive a good local channel. 2. Enter the service mode and select the service adjustment "S07". 3. Adjust "S07" data value so that picture is centered. 1. Receive a good CATV channel or crosshatch pattern signal. 2. Adjust the R676 so that the outermost line on the screen is straight. Caption Position Adjustment (Horizontal) Horizontal Size Adjustment 1. Receive a good local channel. 2. Enter the service mode and select the service adjustment "S18". 3. A black text box appears on the screen. (see Figure B. below) 4. Adjust "S18" data value so that text box is positioned in the center of the screen. 1. Receive a good CATV channel or crosshatch pattern signal. 2. Adjust the R678 so that the best horizontal size. Energy save offset Adjustment 1. Enter the service mode and select the service adjustment "S20". 2. Adjust data value to "23". Note : This position is used to preset the level for the energy save function. Other Adjustments 1. Enter the service mode. 2. Adjust the following data values as listed below. S21 S22 S23 Figure B. 11 "03" "00" "00" DDE OFFSET OSD SETUP TUNER SETUP 32L-S400, 36L-S400 CL32S40, CL36S40 Ë MTS ADJUSTMENT Ë P-IN-P ADJUSTMENT MTS Level Adjustment P-IN-P Y LEVEL Adjustment 1. Feed the following monaural signal to pin (14) of IC3001. Monaural signal : 300Hz, 245mVrms 2. Connect the rms voltmeter to pin (39) of IC3001. 3. Enter the service mode and select the service adjustment "M01". 4. Adjust the data so that the rms voltmeter reads. Spec : 490 ±10mVrms. 1. Receive a good local channel. 2. Enter the service mode and select the service adjustment "P01". 3. Adjust "P01" data value to obtain normal contrast level. P-IN-P TINT Adjustment 1. Receive a good local channel. 2. Enter the service mode and select the service adjustment "P02". 3. Adjust data value to "29". MTS VCO Adjustment 1. Keep the unit in no-signal state. 2. Connect the frequency counter to pin (39) of IC3001. 3. Connect a capacitor (100µF, 50V) in between positive(+) side of C3005 and ground. 4. Enter the service mode and select the service adjustment "M02" 5. Adjust the data so that the frequency counter reads. Spec : 62.94 ±0.75kHz. P-IN-P COLOR Adjustment 1. Receive a good local channel. 2. Make sure the customer color control is set to center position. 3. Enter the service mode and select service adjustment "P03". 4. Adjust "P03" data value to obtain normal color level. Filter Adjustment P-IN-P Y-OFF SET Adjustment 1. Feed the following stereo pilot signal to pin (14) of IC3001 . Stereo pilot signal: 9.4kHz, 600mVrms. 2. Enter the service mode and select the service adjustment "M03". 3. Adjust the data until "OK" appears in position on the screen. Make sure the "OK" is displayed almost at the center of the data range. 1. Receive a good local channel. 2. Enter the service mode and select the service adjustment "P04". 3. Adjust data value to "09". P-IN-P H-POSITION Adjustment 1. Receive a good local channel. 2. Enter the service mode and select the service adjustment "P05". 3. Adjust data value to "0A". Separation Adjustment 1. Connect the rms voltmeter to pin (39) of IC3001. 2. Receive the following composite stereo signal 1. Composite stereo signal: 30% modulation, left channel only, noise reduction on, 300Hz 3. Enter the service mode and select the service adjustment "M04". 4. Adjust the data until the AC voltage reading of the RMS voltmeter is minimum. 5. Receive the following composite stereo signal 2. Stereo signal: 30% modulation, left channel only, noise reduction on, 3kHz 6. Enter the service mode and select the service adjustment "M05". 7. Adjust the data until the AC voltage reading of the RMS voltmeter is minimum. 8. Take the above steps 1 thru 8 again for fine adjustment. P-IN-P BURST GATE PULSE (for MAIN) 1. Receive a good local channel. 2. Enter the service mode and select the service adjustment "P06". 3. Adjust data value to "00". P-IN-P FREE RUN 1. Receive a good local channel. 2. Enter the service mode and select service adjustment "P07". 3. Adjust data value to "0B". 12 32L-S400, 36L-S400 CL32S40, CL36S40 CHASSIS LAYOUT H PWB-B PWB-F G PWB-A PWB-R F E D C B A 1 2 3 4 13 5 6 32L-S400, 36L-S400 CL32S40, CL36S40 BLOCK DIAGRAM H G F E D C B A 1 2 3 4 14 5 6 32L-S400, 36L-S400 CL32S40, CL36S40 DESCRIPTION OF SCHEMATIC DIAGRAM WAVEFORM MEASUREMENT CONDITIONS: 1. Photographs taken on a standard gated color bar signal, the tint setting adjusted for proper color. The wave shapes at the red, green and blue cathodes of the picture tube depend on the tint, color level and picture control. 2. indicates waveform check points (See chart, waveforms are measured from point indicated to chassis ground.) NOTES: 1. The unit of resistance "ohm" is omitted. (K=kΩ=1000Ω, M=MΩ) 2. All resistors are 1/8 watt, unless otherwise noted. 3. All capacitors are µ F, unless otherwise noted. (P=pF=µµF) 4. (G) indicates ±2% tolerance may be used. 5. indicates line isolated ground. 6. indicates hot ground. å AND SHADED ( ) COMPONENTS = SAFETY RELATED PARTS. ç MARK= X-RAY RELATED PARTS. VOLTAGE MEASUREMENT CONDITIONS: 1. All DC voltages are measured with DVM connected between points indicated and chassis ground, line voltage set at 120V AC and all controls set for normal picture unless otherwise indicated. 2. All voltages measured with 1000µ V B & W or Color signal. DRGANNES MARQUES å ET HACHRES ( ): PIECES RELATIVES A LA SECURITE. MARQUE ç : PIECS RELATIVE AUX RAYONS X. This circuit diagram is a standard one, printed circuits may be subject to change for product improvement without prior notice. WAVEFORMS 15 32L-S400, 36L-S400 CL32S40, CL36S40 MODELS 32L-S400, CL32S40 SCHEMATIC DIAGRAM: MAIN-1 Unit H G F E D C B A 1 2 3 4 5 6 16 7 8 9 10 32L-S400, 36L-S400 CL32S40, CL36S40 10 11 12 13 14 15 17 16 17 18 19 32L-S400, 36L-S400 CL32S40, CL36S40 MODELS 32L-S400, CL32S40 SCHEMATIC DIAGRAM: MAIN-2 Unit H G F E D C B A 1 2 3 4 5 6 18 7 8 9 10 32L-S400, 36L-S400 CL32S40, CL36S40 10 11 12 13 14 15 19 16 17 18 19 32L-S400, 36L-S400 CL32S40, CL36S40 MODELS 36L-S400, CL36S40 SCHEMATIC DIAGRAM: MAIN-1 Unit H G F E D C B A 1 2 3 4 5 6 20 7 8 9 10 32L-S400, 36L-S400 CL32S40, CL36S40 10 11 12 13 14 15 21 16 17 18 19 32L-S400, 36L-S400 CL32S40, CL36S40 MODELS 36L-S400, CL36S40 SCHEMATIC DIAGRAM: MAIN-2 Unit H G F E D C B A 1 2 3 4 5 6 22 7 8 9 10 32L-S400, 36L-S400 CL32S40, CL36S40 10 11 12 13 14 15 23 16 17 18 19 32L-S400, 36L-S400 CL32S40, CL36S40 SCHEMATIC DIAGRAM: CRT Unit MODELS 32L-S400, CL32S40 H G F E MODELS 36L-S400, CL36S40 D C B A 1 2 3 4 24 5 6 32L-S400, 36L-S400 CL32S40, CL36S40 SCHEMATIC DIAGRAM: P-IN-P Unit H G F E D C B A 1 2 3 4 25 5 6 32L-S400, 36L-S400 CL32S40, CL36S40 SCHEMATIC DIAGRAM: CONTROL Unit H G F E D C B A 1 2 3 4 26 5 6 32L-S400, 36L-S400 CL32S40, CL36S40 PRINTED WIRING BOARD ASSEMBLIES H G F E D C B A PWB-A: MAIN Unit (Wiring Side) 1 2 3 4 27 5 6 32L-S400, 36L-S400 CL32S40, CL36S40 H G F E D C B A PWB-A: MAIN Unit (Chip Parts Side) 1 2 3 4 28 5 6 32L-S400, 36L-S400 CL32S40, CL36S40 H G F E PWB-R: P-IN-P Unit (Wiring Side) D C B PWB-R: P-IN-P Unit (Chip Parts Side) A 1 2 3 4 29 5 6 32L-S400, 36L-S400 CL32S40, CL36S40 H G F E D PWB-B: CRT Unit (Wiring Side) C B A PWB-F: CONTROL Unit (Wiring Side) 1 2 3 4 30 5 6 32L-S400, 36L-S400 CL32S40, CL36S40 PARTS LIST Ref. No. ★ Part No. Description LISTE DES PIECES Code Ref. No. Part No. ★ Description Code PARTS REPLACEMENT CHANGE DES PIECES Replacement parts which have these special safety characteristics identified in this manual; electrical components having such features are identified by å and shaded areas in the Replacement Parts Lists and Schematic Diagrams. The use of a substitute replacement part which dose no have the same safety characteristic as the factory recommended replacement parts shown in this service manual may create shock, fire or other hazards. Les pi`eces de rechange qui pr élelesentent ces caract éleristiques sp éleciales de s élecurit éle, sont identifi élees dans ce manuel : les pi`eces élelectriques qui pr élesentent ces particularit éles, sont rep éler élee par la marque å et sont hachur élees dans les listes de pi`eces et dans les diagrammes sch élematiques. La substitution d'une pi`ece de rechange par une autre qui ne pr éLesente pas les m éoemes caract éLeristiques de s élecurit éle que la pi`ece recommand élee parl'usine et dans ce manuel de service, peut provoquer une éLelectrocution, un incendie ou toutautre sinistre. "HOW TO ORDER REPLACEMENT PARTS" To have your order filled promptly and correctly, please furnish the following informations. 1. MODEL NUMBER 2. REF. NO. 3. PART NO. 4. DESCRIPTION in USA: "COMMENT COMMANDER LES PIECES DE RECHANGE" Pour que votre commande soit rapidement et correctement remplie, veuillez fournir les renseignements suivants. Contact your nearest SHARP Parts Distributor to order. For location of SHARP Parts Distributor, Please call TollFree; 1-800-BE-SHARP 1. NUMERO DU MODELE 2. NO. DE REF 3. NO. DE PIECE 4. DESCRIPTION in CANADA: Contact SHARP Electronics of Conada Limited Phone (416) 890-2100 ★MARK: SPARE PARTS-DELIVERY SECTION ★MARQUE: SECTION LIVRAISON DES PIECES DE RECHANGE ç MARK : X- RAY RELATED PARTS ç MARQUE : PIECES RELATIVE AUX RAYONS X Ref. No. ★ Part No. Description Ref. No. Code çå V101 32L-S400, CL32S40 çå DY601 å L702 VB80LJF3015*S or VB80EKC272X1E or VB80LJF30X/*S or VB80JUA061X*S RCiLH0108MEZZ or RCiLH0109MEZZ or RCiLH0104MEZZ RCiLG0034MEZZ or RCiLG0028MEZZ MSPRT0002MEZZ QEARC3102MEZZ CRT A80LJF30X COMBINATION M80JUA061X A80LJF30X15 A80EKC272X1 M Picture Tube (I.T.C.) DD å L702 M Picture Tube (I.T.C.) M Picture Tube (DY: H0108ME) M Picture Tube (DY: H0104ME or H0109ME) M DY (CRT: A80LJF30X) COMBINATION M DY (CRT: A80JUA061X) M DY (CRT: A80JUA061X) M Degaussing Coil AV M Spring for CRT M Grounding Part AA AH DY H0108ME H0109ME H0104ME I.T.C. I.T.C. ★ Description Code 36L-S400, CL36S40 PICTURE TUBE çå V101 Part No. VB90AHH5006*S or VB90AEJ1509*S or VB90AFX1513*S RCiLG0035MEZZ or RCiLG0027MEZZ MSPRT0002MEZZ QEARC3502MEZZ CRT A90AHH5006 A90AEJ1509 A90AFX1513 M Picture Tube (I.T.C.) DU M Picture Tube (I.T.C.) M Picture Tube (I.T.C.) M Degaussing Coil AW M Spring for CRT M Grounding Part AA AH R621 R553 R554 R513 R502 R519 R520 R840-2 2.7/3W 82k 18k 56K 10k(B) 12k 180k JUMPER 2.2/3W 100k 22k 47K 33k(B) 10k 150k OPEN PRINTED WIRING BOARD ASSEMBLIES C610 R621 C676 9100p /1.6kV 1.2/3W 0.01 /1.6kV 1.5/3W 0.047/400V 0.01 /1.6kV 1.5/3W 9100p /1.6kV 1.2/3W 9100p /1.6kV 3.3/2W 0.039/400V (NOT REPLACEMENT ITEM) PWB-A DUNTK9829WEK0 PWB-A DUNTK9829WEK1 PWB-B DUNTK9303WEK3 PWB-B DUNTK9303WEK4 PWB-F DUNTK9514WEK0 PWB-R DUNTK9511WEK2 31 – MAIN Unit (32L-S400, CL32S40) – MAIN Unit (36L-S400, CL36S40) – CRT Unit (32L-S400, CL32S40) – CRT Unit (36L-S400, CL36S40) – CONTROL Unit – P-IN-P Unit — — — — — — 32L-S400, 36L-S400 CL32S40, CL36S40 Ref. No. ★ Part No. Description Code Ref. No. PWB-A: DUNTK9829WEK0 (32L-S400, CL32S40) PWB-A: DUNTK9829WEK1 (36L-S400, CL36S40) MAIN UNIT TUNER NOTE: THE PARTS HERES SHOWN ARE SUPPLIED AS AN ASSEMBLY BUT NOT INDEPENEDENTLY. å TU51 VTU115B8035AT M Tuner or VTU115B8025AM TU51 COMBINATION 115B8035AT R53 47 (2W) 115B8025AM D53 EX0611GE 1 — C54 4.7u (50V) 2.2u (50V) AU J J J J J KA78S05P TA1268AN LA4261 M52055FP TA8427K AD AV AH AH AL J J J J AD AX AD AG å IC703 VHiSE125N//-1 M å IC750 VHiKA7809Pi-1 VHiKA7809Pi-1 VHiMM1113XF1E VHiTC90A45F-1 VHiMM1111XF1E VHiKA78L05B-1 RH-iX3256CEZZ VHiKiA7045P-1 VHiM24C01B/-1 VHiCXA2074Q-1 VHiAN5285K/-1 R R J J J J J J J J J UPC358C STRF6626 PS2501-1 SE135N (36L-S400, CL36S40) SE125N (32L-S400, CL32S40) KA7809PI KA7809PI MM1113XFBE TC90A45F MM1111XFBE KA78L05BP I.C. KIA7045P I.C. CXA2074Q AN5285K IC671 çå IC701 å IC702 å IC703 IC751 IC951 IC1401 IC1402 IC1403 IC2001 IC2040 IC2101 IC3001 IC3201 VS2SD601AR/-1 VS2SD601AR/-1 VS2SD601AR/-1 VS2SD601AR/-1 VS2SD601AR/-1 VS2SD601AR/-1 VS2SD601AR/-1 VS2SB709AR/-1 VS2SD601AR/-1 VS2SD601AR/-1 VS2SD601AR/-1 J J J J J J J J J J J D51 D52 D53 D103 D401 D402 D403 D404 D405 D454 D455 D481 D482 D501 D510 D511 D605 D621 D622 D651 D652 D653 RH-EX0611GEZZ RH-EX0676GEZZ RH-EX0611GEZZ VHD1SS119//-1 VHD1SS119//-1 RH-EX0723GEZZ RH-EX0611GEZZ RH-EX0611GEZZ RH-EX0611GEZZ RH-EX0611GEZZ VHD1SS119//-1 VHD1SS119//-1 VHD1SS119//-1 RH-DX0302CEZZ RH-DX0441CEZZ RH-EX0654CEZZ RH-DX0255CEZZ RH-EX0631GEZZ RH-DX0131CEZZ RH-DX0073CEZZ RH-EX0641GEZZ VHD1SS119//-1 J J J J J J J J J J J J J J J J J J J J J J VHD1SS119//-1 J RH-EX0664GEZZ VHD1SS119//-1 RH-DX0229CEZZ VHD1SS119//-1 VHD1SS82///1A RH-DX0066GEZZ VHD1SS82///1A RH-DX0066GEZZ RH-DX0229CEZZ RH-EX0673GEZZ RH-DX0407CEZZ or RH-DX0468CEZZ RH-DX0259CEZZ or RH-DX0477CEZZ RH-EX0610GEZZ VHD1SS119//-1 RH-EX0650GEZZ RH-DX0407CEZZ or RH-DX0468CEZZ RH-DX0441CEZZ RH-DX0441CEZZ RH-DX0441CEZZ RH-DX0441CEZZ VHD1SS119//-1 RH-DX0441CEZZ VHD1SS119//-1 VHD1SS119//-1 VHD1SS119//-1 RH-EX0611GEZZ RH-VX0035CEZZ J J J J J J J J J J J 2SD601AR 2SD601AR 2SD601AR 2SD601AR 2SD601AR 2SD601AR 2SD601AR 2SB709AR 2SD601AR 2SD601AR 2SD601AR Code AC AC AC AC AC AC AC AC AC AC AC DIODES 10k VHiKA78S05P-1 RH-iX3253CEZZ RH-iX1135CEZZ VHiM52055FP-1 VHiTA8427K/-1 or RH-iX1224CEZZ VHiUPC358C/-1 VHiSTRF66261E RH-FX0002GEZZ VHiSE135N//-1 Description Q1402 Q1403 Q1404 Q1405 Q1406 Q1407 Q1601 Q1602 Q2060 Q2201 Q2211 R57 3.9k INTEGRATED CIRCUITS IC101 çå IC201 å IC361 IC470 å IC501 ★ Part No. å å çå çå çå AE AE AE AM AE AE çå D654 D671 D672 å D673 D674 D705 D706 D707 D708 D709 å D710 å D712 AD AY AP TRANSISTORS You can subsitute "VS2SD601AR/-1" for "VS2SC2462-C-1". Q201 VS2SC2735//1E J 2SC2735 AC Q251 VS2SD601AR/-1 J 2SD601AR AC Q252 VS2SD601AR/-1 J 2SD601AR AC Q253 VS2SD601AR/-1 J 2SD601AR AC Q301 VS2SD601AR/-1 J 2SD601AR AC Q360 VS2SD601AR/-1 J 2SD601AR AC Q401 VS2SD601AR/-1 J 2SD601AR AC Q402 VS2SB709AR/-1 J 2SB709AR AC Q403 VS2SD601AR/-1 J 2SD601AR AC Q421 VS2SB709AR/-1 J 2SB709AR AC Q451 VS2SA1266-Y-1 J 2SA1266 (Y) AA Q601 VS2SC2482//-1 J 2SC2482 AD å Q602 VS2SC5150//2E M 2SC5150 (36L-S400, CL36S40) å Q602 VS2SD2500//2E J 2SD2500 AT (32L-S400, CL32S40) Q672 VS2SA1266-Y-1 J 2SA1266 (Y) AA Q673 VS2SD2045//-1 J 2SD2045 AL Q751 VS2SC3198-Y-1 J 2SC3198 (Y) AA Q901 VS2SD601AR/-1 J 2SD601AR AC Q902 VS2SD601AR/-1 J 2SD601AR AC Q903 VS2SD601AR/-1 J 2SD601AR AC Q904 VS2SD601AR/-1 J 2SD601AR AC Q921 VS2SD601AR/-1 J 2SD601AR AC Q922 VS2SD601AR/-1 J 2SD601AR AC Q923 VS2SD601AR/-1 J 2SD601AR AC Q924 VS2SD601AR/-1 J 2SD601AR AC Q1401 VS2SD601AR/-1 J 2SD601AR AC å D713 D715 D716 D717 å D725 å å å å D751 D752 D753 D754 D755 D756 D1401 D1402 D1403 D2011 å VA701 Zener Diode Zener Diode Zener Diode Diode Diode Zener Diode Zener Diode Zener Diode Zener Diode Zener Diode Diode Diode Diode Diode Diode Zener Diode Diode Zener Diode Diode Diode Zener Diode Diode (32L-S400, CL32S40) Diode (32L-S400, CL32S40) Zener Diode Diode Diode Diode Diode Diode Diode Diode Diode Zener Diode Diode AA AA AA AB AB AB AA AA AA AA AB AB AB AC AC AD AC AA AC AD AA AB AB AA AB AF AB AC AB AC AB AF AB AD J Diode AH J J J J Zener Diode Diode Zener Diode Diode AA AB AB AD J J J J J J J J J J J Diode Diode Diode Diode Diode Diode Diode Diode Diode Zener Diode Varistor AC AC AC AC AB AC AB AB AB AA AF PACKAGED CIRCUITS å PR701 RMPTP0059CEZZ 32 J Packaged Circuit AH 32L-S400, 36L-S400 CL32S40, CL36S40 Ref. No. ★ Part No. Description Code Ref. No. PWB-A: DUNTK9829WEK0 (32L-S400, CL32S40) PWB-A: DUNTK9829WEK1 (36L-S400, CL36S40) MAIN UNIT (Continued) X801 RCRSB0205CEZZ or RCRSB0001PEZZ CF301 CF302 CF401 CF631 CF2040 SF201 RFiLC0267CEZZ RFiLC0029TAZZ RFiLC0013CEZZ RFiLA0034CEZZ RFiLC0121GEZZ RFiLC0405CEZZ J Crystal AF FILTERS J J J J J J Ceramic Filter Ceramic Filter Ceramic Filter Ceramic Filter Ceramic Filter S.A.W. Filter AD AD AE AD AD AH COILS L201 L202 L251 L301 L302 L401 L402 L403 L404 L631 L671 L672 å L701 å L702 L705 L729 L1401 L1402 L1403 L1405 L2040 VP-XF1R2K0000 RCiLi0588CEZZ VP-XF390K0000 VP-XF8R2K0000 RCiLi0613CEZZ VP-XF6R8K0000 VP-XF3R3K0000 VP-XF8R2K0000 VP-XF8R2K0000 VP-XF150K0000 RCiLZ1005CEZZ RCiLZ0789CEZZ RCiLF0273CEZZ RCiLF0025PEZZ or RCiLF0273PEZZ RCiLP0179CEZZ RCiLP0179CEZZ VP-XF100K0000 VP-XF100K0000 VP-XF150K0000 VP-XF330K0000 RCiLB0159CEZZ J J J J J J J J J J J J J R Peaking 1.2µH VCO Coil Peaking 39µH Peaking 8.2µH IF Coil Peaking 6.8µH Peaking 3.3µH Peaking 8.2µH Peaking 8.2µH Peaking 15µH Coil Coil Line Filter Line Filter AB AF AB AB AE AB AB AB AB AB AH AK AM AK J J J J J J J Coil Coil Peaking 10µH Peaking 10µH Peaking 15µH Peaking 33µH Oscillation Coil AD AD AB AB AB AB AE TRANSFORMERS å T601 çå T602 RTRNZ0057PEZZ RTRNF0040MEZZ çå T602 RTRNF0035MEZZ å T701 å T702 RTRNP0543CEZZ RTRNZ0018MEZZ R502 R676 R678 RVR-M4334CEZZ RVR-M4334CEZZ RVR-M4336CEZZ R Transformer M H-Volt Transformer (36L-S400, CL36S40) M H-Volt Transformer (32L-S400, CL32S40) J Power Transformer M Transformer AK AM CONTROLS J 10k (B) V-Lin J 10k (B) H-Lin J 22k (B) H-Size AC AC AC CAPACIORS [EL.··· Electrolytic, M-Poly.··· Metalized Polypro Film] C51 VCEA0A1CW476M J 47 16V EL. C53 VCEA0A1HW105M J 1.0 50V EL. C54 VCEA0A1HW475M J 4.7 50V EL. C55 VCEA0A1CW108M J 1000 16V EL. C103 VCEA0A1CW228M J 2200 16V EL. C201 VCKYCY1HB102K J 1000p 50V Ceramic C202 VCKYCY1HF103Z J 0.01 50V Ceramic C203 VCKYCY1HB102K J 1000p 50V Ceramic C204 VCKYCY1HF103Z J 0.01 50V Ceramic C205 VCEA0A1HW474M J 0.47 50V EL. C206 VCEA0A1CW337M J 330 16V EL. C207 VCKYCY1HF103Z J 0.01 50V Ceramic C208 VCEA0A1HW474M J 0.47 50V EL. C209 VCKYCY1HB222K J 2200p 50V Ceramic C210 VCKYCY1HB102K J 1000p 50V Ceramic C251 VCKYCY1HB103K J 0.01 50V Ceramic C252 VCKYCY1HB103K J 0.01 50V Ceramic AB AB AB AD AD AA AA AA AA AB AC AA AB AA AA AA AA 33 Part No. ★ Description C253 C301 C302 C303 C307 C308 C309 C312 C360 C361 C364 C365 C368 C369 C370 C371 C372 C380 C381 C401 C402 C403 C404 C405 C406 C408 C409 C410 C411 C412 C413 C414 C422 C451 C452 C453 C471 C472 C473 C474 C476 C477 C478 C501 C502 C509 C510 C511 C512 C513 C514 C515 C516 C517 C518 C519 C551 C552 C553 C605 C606 C607 C608 VCCCCY1HH470J VCCCCY1HH330J VCCCCY1HH151J VCCCCY1HH390J VCCCCY1HH1R5C VCKYCY1HB102K VCEA0A1CW337M VCEA0A1CW476M VCEA0A1HW225M VCEA0A1HW225M VCEA0A1EW107M VCEA0A0JW107M VCEA0A1CW477M VCEA0A1CW477M VCEA0A0JW107M RC-QZA104TAYK RC-QZA104TAYK RC-QZA103TAYK RC-QZA103TAYK VCKYCY1HB331K VCCCCY1HH101J VCKYCY1CB104K VCEA0A1CW107M VCEA0A1HW335M VCEA0A1HW225M VCEA0A1HW106M VCEA0A1HW335M VCKYCY1CB104K VCEA0A1CW337M VCKYCY1HB103K VCKYCY1HB103K VCKYCY1HB103K VCEA0A1CW476M RC-QZA104TAYK VCEA0A1HW475M VCEA0A1CW226M VCKYCY1HB103K VCEA0A1HW106M VCEA0A1CW106M VCEA0A1CW106M VCKYCY1HB103K VCE9GA1CW106M VCKYCY1HB103K VCKYPA2HB102K VCEA0A1VW337M VCCSPA1HL101J VCFYSA1JA564J VCKYPA2HB391K RC-QZA683TAYJ RC-QZA103TAYK VCEA0A1VW107M VCEACA1HC225J VCEACA1HC105J VCEA0A1VW108M VCFYSA1JA473J VCEA0A1HW105M VCSATA1CE225K VCEA0A1HW225M VCKYCY1HB102K VCKYPA1HB102K VCKYPA2HB561K VCKYPA1HB472K VCKYPH3DB271K J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J C608 RC-KZ0033CEZZ J C609 VCFPVC3CA822H J C609 VCFPVC3CA912H J C610 C615 C622 C623 C631 C632 VCFPVC3CA912H VCKYPA2HB272K VCKYPA2HB102K VCEA0A2CW336M VCEA0A1HW335M RC-QZA103TAYK J J J J J J Code 47p 50V Ceramic 33p 50V Ceramic 150p 50V Ceramic 39p 50V Ceramic 1.5p 50V Ceramic 1000p 50V Ceramic 330 16V EL. 47 16V EL. 2.2 50V EL. 2.2 50V EL. 100 25V EL. 100 6.3V EL. 470 16V EL. 470 16V EL. 100 6.3V EL. 0.1 50V Mylar 0.1 50V Mylar 0.01 50V Mylar 0.01 50V Mylar 330p 50V Ceramic 100p 50V Ceramic 0.1 16V Ceramic 100 16V EL. 3.3 50V EL. 2.2 50V EL. 10 50V EL. 3.3 50V EL. 0.1 16V Ceramic 330 16V EL. 0.01 50V Ceramic 0.01 50V Ceramic 0.01 50V Ceramic 47 16V EL. 0.1 50V Mylar 4.7 50V EL. 22 16V EL. 0.01 50V Ceramic 10 50V EL. 10 16V EL. 10 16V EL. 0.01 50V Ceramic 10 16V EL.(N.P) 0.01 50V Ceramic 1000p 500V Ceramic 330 35V EL. 100p 50V Ceramic 0.56 63V Mylar 390p 500V Ceramic 0.068 50V Mylar 0.01 50V Mylar 100 35V EL. 2.2 50V EL. 1.0 50V EL. 1000 35V EL. 0.047 63V Mylar 1.0 50V EL. 2.2 16V Tantalum 2.2 50V EL. 1000p 50V Ceramic 1000p 50V Ceramic 560p 500V Ceramic 4700p 50V Ceramic 270p 2000V Ceramic (36L-S400, CL36S40) 150p 2kV Ceramic (32L-S400, CL32S40) 8200p 1.6kV M-Poly. (36L-S400, CL36S40) 9100p 1.6kV M-Poly. (32L-S400, CL32S40) 9100p 1.6kV M-Poly. 2700p 500V Ceramic 1000p 500V Ceramic 33 160V EL. 3.3 50V EL. 0.01 50V Mylar AA AA AA AA AD AA AC AB AB AB AC AB AC AC AB AB AB AA AA AA AA AB AC AB AB AB AB AB AC AA AA AA AB AB AB AB AA AB AB AB AA AB AA AA AD AA AE AA AB AA AC AC AB AD AC AB AB AB AA AA AA AA AC AB AE AE AE AA AA AE AB AA 32L-S400, 36L-S400 CL32S40, CL36S40 Ref. No. Part No. ★ Description Code Ref. No. PWB-A: DUNTK9829WEK0 (32L-S400, CL32S40) PWB-A: DUNTK9829WEK1 (36L-S400, CL36S40) C931 C932 C951 C952 C954 C955 C956 C1401 C1402 C1403 C1404 C1405 C1406 C1407 C1408 C1409 C1410 C1411 C1412 C1413 C1415 C1416 C1417 C1418 C1419 C1420 C1421 C1423 C1424 C1425 C1426 C1427 C1428 C1601 C1602 C1603 C2001 C2002 C2040 C2041 C2060 C2061 C2062 C2063 C2201 C2202 C3001 C3002 C3003 C3004 C3005 C3006 C3007 C3008 C3009 C3010 C3011 C3012 C3013 C3014 C3015 C3016 C3017 C3018 C3021 C3022 C3031 C3032 C3201 C3202 C3203 C3204 C3205 C3206 C3207 C3208 MAIN UNIT (Continued) C633 C652 C653 C671 C672 C673 C674 C675 C676 C677 çå C678 VCEA0A1CW107M VCEA0A1VW476M VCEA0A1HW106M VCEA0A1EW336M VCEACA1HC335J VCEA0A1VW337M VCKYCY1HF103Z VCEA0A1VW106M VCE9GA1EW336M RC-FZ0374CEZZ VCQPPC2JB473J J J J J J J J J J J J çå C678 VCQPPC2GB473J J C680 C682 å C701 C702 C703 å C705 å C705 C706 å å å å C707 C708 C709 C710 C717 C722 C723 C725 C726 C727 C729 C730 C731 C732 C741 C742 C751 C753 C755 C772 C773 C801 C802 C803 C804 C805 C806 C807 C901 C903 C922 C923 C925 C926 C927 C928 C929 C930 100 16V EL. 47 35V EL. 10 50V EL. 33 25V EL. 3.3 50V EL. 330 35V EL. 0.01 50V Ceramic 10 35V EL. 33 25V EL.(N.P) 4.7 50V 0.047 630V M-Poly. (36L-S400, CL36S40) 0.047 630V M-Poly. (32L-S400, CL32S40) 0.68 200V M-Poly. 1000p 500V Ceramic 0.22 AC125V Plastic VCFPVC2DB684J M VCKYPA2HB102K J RC-FZ017SCEZZ J or RC-FZ0025PEZZ RC-KZ0029CEZZ J 0.01 500V Ceramic RC-KZ0029CEZZ J 0.01 500V Ceramic RC-EZ0722CEZZ M 820 200V EL. or (36L-S400, CL36S40) RC-EZ0395CEZZ or RC-EZ0685CEZZ RC-EZ0720CEZZ J 680 200V EL. or (32L-S400, CL32S40) RC-EZ0684CEZZ or RC-EZ0394CEZZ RC-KZ0092GEZZ J 0.0033 AC250V Ceramic or RC-KZ0311CEZZ VCFPVC3CA222H J 2200p 1.6kV M-Poly. VCCSPA1HL471J J 470p 50V Ceramic VCEA0A1VW107M J 100 35V EL. RC-QZA821TAYJ J 820p 50V Mylar VCKYPA2HB472K J 4700p 500V Ceramic RC-QZA104TAYK J 0.1 50V Mylar RC-EZ0724CEZZ J 100 16V EL. RC-EZ0810CEZZ M 330 160V EL. RC-KZ0338CEZZ J 560p 2kV Ceramic RC-KZ0338CEZZ J 560p 2kV Ceramic VCEA0A1CW106M J 10 16V EL. VCEA4A1EN108M J 1000 25V EL. RC-EZ0385CEZZ J 1000 16V EL. VCKYPA2HB102K J 1000p 500V Ceramic VCKYPA2HB102K J 1000p 500V Ceramic VCKYPA2HB102K J 1000p 500V Ceramic VCKYPA1HF103Z J 0.01 50V Ceramic VCEA0A1CW107M J 100 16V EL. VCEA0A1CW476M J 47 16V EL. VCEA0A1VW477M J 470 35V EL. VCCSPA1HL101J J 100p 50V Ceramic RC-QZA223TAYK J 0.022 50V Mylar VCEA0A1HW474M J 0.47 50V EL. VCCCCY1HH110J J 11p 50V Ceramic VCKYCY1CB104K J 0.1 16V Ceramic VCKYCY1CB104K J 0.1 16V Ceramic VCKYCY1CB104K J 0.1 16V Ceramic VCCCCY1HH221J J 220p 50V Ceramic VCEA0A1HW335M J 3.3 50V EL. VCEA0A1HW335M J 3.3 50V EL. VCEA0A1HW335M J 3.3 50V EL. VCEA0A1HW335M J 3.3 50V EL. VCEA0A1CW476M J 47 16V EL. VCEA0A1CW476M J 47 16V EL. VCKYCY1HB103K J 0.01 50V Ceramic VCKYCY1HB103K J 0.01 50V Ceramic VCEA0A1CW106M J 10 16V EL. VCEA0A1CW106M J 10 16V EL. AC AB AB AB AC AD AA AB AB AF AC AC AA AD AC AC AL AC AE AA AC AB AB AG AD AD AB AD AE AA AA AA AA AC AB AB AA AB AB AA AB AB AB AA AB AB AB AB AB AB AA AA AB AB 34 Part No. ★ VCKYCY1EB183K VCKYCY1EB183K VCEA0A1CW106M VCEA0A1CW106M VCKYCY1HF103Z VCEA0A1CW106M VCEA0A1CW337M VCCCCY1HH220J VCFYSA1HB474J VCKYCY1HF103Z VCKYPA1HF103Z VCKYCY1HF103Z VCKYCY1HF103Z VCKYCY1HF103Z VCEA0A1HW106M VCKYCY1HF103Z VCCCCY1HH181J VCKYCY1HF103Z VCKYCY1HF103Z VCKYCY1HF103Z VCEA0A1CW476M VCKYCY1HF103Z VCCCCY1HH390J VCEA0A1HW106M VCEA0A1HW106M VCKYCY1HB103K VCCCCY1HH120J VCCCCY1HH120J VCKYCY1CB104K VCKYCY1CB104K VCKYCY1HB102K VCE9GA1CW106M VCCCCY1HH270J VCEA0A1CW106M VCCCCY1HH470J VCKYCY1HB221K VCCCCY1HH101J VCCCCY1HH101J VCEA0A1AW107M VCEA0A1HW105M VCKYCY1CB104K VCCCCY1HH101J VCEA0A1AW107M VCKYCY1HF103Z VCKYCY1HB681K VCCCCY1HH390J VCE9GA1HW475M VCKYCY1HB562K RC-QZA123TAYK VCEA0A1HW105M VCEA0A1HW475M VCEA0A1HW106M VCEA0A1HW475M VCKYCY1HF103Z VCEA0A1CW227M VCE9GA1HW475M VCEA0A1HW475M VCE9GA1HW475M VCKYCY1HB272K RC-QZA473TAYK VCSATA1CE335K VCE9GA1HW475M VCSATA1CE106K VCEA0A1HW105M VCEA0A1HW475M VCEA0A1HW475M VCEA0A1HW475M VCEA0A1HW475M VCE9GA1HW475M VCE9GA1HW475M VCEA0A1HW475M VCEA0A1CW106M VCEA0A1CW106M VCKYCY1HB103K VCE9GA1HW475M VCE9GA1HW475M Description J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 0.018 0.018 10 10 0.01 10 330 22p 0.47 0.01 0.01 0.01 0.01 0.01 10 0.01 180p 0.01 0.01 0.01 47 0.01 39p 10 10 0.01 12p 12p 0.1 0.1 1000p 10 27p 10 47p 220p 100p 100p 100 1.0 0.1 100p 100 0.01 680p 39p 4.7 5600p 0.012 1.0 4.7 10 4.7 0.01 220 4.7 4.7 4.7 2700p 0.047 3.3 4.7 10 1.0 4.7 4.7 4.7 4.7 4.7 4.7 4.7 10 10 0.01 4.7 4.7 25V 25V 16V 16V 50V 16V 16V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 16V 50V 50V 50V 50V 50V 50V 50V 16V 16V 50V 16V 50V 16V 50V 50V 50V 50V 10V 50V 16V 50V 10V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 16V 50V 50V 50V 50V 50V 16V 50V 16V 50V 50V 50V 50V 50V 50V 50V 50V 16V 16V 50V 50V 50V Code Ceramic Ceramic EL. EL. Ceramic EL. EL. Ceramic Mylar Ceramic Ceramic Ceramic Ceramic Ceramic EL. Ceramic Ceramic Ceramic Ceramic Ceramic EL. Ceramic Ceramic EL. EL. Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic EL.(N.P) Ceramic EL. Ceramic Ceramic Ceramic Ceramic EL. EL. Ceramic Ceramic EL. Ceramic Ceramic Ceramic EL.(N.P) Ceramic Mylar EL. EL. EL. EL. Ceramic EL. EL.(N.P) EL. EL.(N.P) Ceramic Mylar Tantalum EL.(N.P) Tantalum EL. EL. EL. EL. EL. EL.(N.P) EL.(N.P) EL. EL. EL. Ceramic EL.(N.P) EL.(N.P) AA AA AB AB AA AB AC AA AC AA AA AA AA AA AB AA AA AA AA AA AB AA AA AB AB AA AA AA AB AB AA AB AA AB AA AA AA AA AB AB AB AA AB AA AA AA AB AA AB AB AB AB AB AA AC AB AB AB AA AB AC AB AD AB AB AB AB AB AB AB AB AB AB AA AB AB 32L-S400, 36L-S400 CL32S40, CL36S40 Ref. No. Part No. ★ Description Code Ref. No. PWB-A: DUNTK9829WEK0 (32L-S400, CL32S40) PWB-A: DUNTK9829WEK1 (36L-S400, CL36S40) MAIN UNIT (Continued) RESISTORS RJ2 RJ3 RJ19 RJ20 RJ21 RJ22 RJ23 RJ24 RJ25 RJ27 RJ28 RJ29 RJ30 RJ31 RJ32 RJ33 RJ35 RJ36 å R51 R53 R54 R55 R56 R57 R201 R202 R203 R204 R205 R206 R207 R208 R209 R251 R252 R253 R254 R255 R256 R257 R258 R259 R301 R302 R303 R304 R305 R306 R360 R361 R362 R363 R364 R365 R370 R371 R372 R401 R402 R403 R404 R405 R406 R407 R408 R409 R410 R411 R412 [M-Ox.··· Metal Oxide, M-Film··· Metal Film] VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-CY1JF000J J 0 1/16W M-Ox. VRS-RG3AB151J M 150 1W M-Ox. VRS-RG3DB470J M 47 2W M-Ox. VRS-CY1JF101J J 100 1/16W M-Ox. VRS-CY1JF101J J 100 1/16W M-Ox. VRS-CY1JF823J J 82k 1/16W M-Ox. VRS-CY1JF392J J 3.9k 1/16W M-Ox. VRS-CY1JF151J J 150 1/16W M-Ox. VRS-CY1JF122J J 1.2k 1/16W M-Ox. VRS-CY1JF682J J 6.8k 1/16W M-Ox. VRS-CY1JF270J J 27 1/16W M-Ox. VRS-CY1JF331J J 330 1/16W M-Ox. VRD-RA2BE121J J 120 1/8W Carbon VRD-RA2BE4R7J J 4.7 1/8W Carbon VRD-RA2BE331J J 330 1/8W Carbon VRS-CY1JF222J J 2.2k 1/16W M-Ox. VRS-CY1JF332J J 3.3k 1/16W M-Ox. VRS-CY1JF562J J 5.6k 1/16W M-Ox. VRS-CY1JF332J J 3.3k 1/16W M-Ox. VRS-CY1JF223J J 22k 1/16W M-Ox. VRS-CY1JF563J J 56k 1/16W M-Ox. VRS-CY1JF472J J 4.7k 1/16W M-Ox. VRS-CY1JF470J J 47 1/16W M-Ox. VRS-CY1JF472J J 4.7k 1/16W M-Ox. VRS-CY1JF182J J 1.8k 1/16W M-Ox. VRD-RA2BE222J J 2.2k 1/8W Carbon VRS-CY1JF102J J 1.0k 1/16W M-Ox. VRS-CY1JF103J J 10k 1/16W M-Ox. VRS-CY1JF333J J 33k 1/16W M-Ox. VRS-CY1JF102J J 1.0k 1/16W M-Ox. VRS-CY1JF152J J 1.5k 1/16W M-Ox. VRD-RA2BE331J J 330 1/8W Carbon VRD-RA2BE562J J 5.6k 1/8W Carbon VRD-RA2BE562J J 5.6k 1/8W Carbon VRS-CY1JF122J J 1.2k 1/16W M-Ox. VRS-CY1JF122J J 1.2k 1/16W M-Ox. VRS-CY1JF221J J 220 1/16W M-Ox. VRS-CY1JF221J J 220 1/16W M-Ox. VRD-RA2EE3R3J J 3.3 1/4W Carbon VRD-RA2EE3R3J J 3.3 1/4W Carbon VRS-CY1JF682J J 6.8k 1/16W M-Ox. VRS-CY1JF331J J 330 1/16W M-Ox. VRS-CY1JF391J J 390 1/16W M-Ox. VRS-CY1JF102J J 1.0k 1/16W M-Ox. VRS-CY1JF470J J 47 1/16W M-Ox. VRS-CY1JF680J J 68 1/16W M-Ox. VRS-CY1JF102J J 1.0k 1/16W M-Ox. VRS-CY1JF471J J 470 1/16W M-Ox. VRD-RA2BE562J J 5.6k 1/8W Carbon VRD-RA2BE823J J 82k 1/8W Carbon VRD-RA2BE682J J 6.8k 1/8W Carbon VRD-RA2BE561J J 560 1/8W Carbon AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA 35 Part No. ★ Description R413 R414 R415 R416 R420 R421 R424 R426 R427 R428 R431 R432 R433 R434 å R451 R452 R453 VRS-CY1JF101J VRS-CY1JF101J VRS-CY1JF101J VRS-CY1JF103J VRS-CY1JF332J VRS-CY1JF152J VRS-CY1JF102J VRS-CY1JF182J VRS-CY1JF182J VRS-CY1JF182J VRS-CY1JF330J VRS-CY1JF330J VRS-CY1JF330J VRS-CY1JF101J VRS-RG3AB103J VRD-RM2HD683J VRD-RA2EE682J J J J J J J J J J J J J J J J J J R454 R456 R458 R471 R472 R473 R474 R475 R481 R482 å R501 R506 R510 R511 VRS-CY1JF102J VRS-CY1JF682J VRS-CY1JF152J VRS-CY1JF101J VRS-CY1JF101J VRD-RA2BE102J VRS-CY1JF101J VRD-RA2BE102J VRS-CY1JF682J VRS-CY1JF103J VRN-RL3LB2R2J VRD-RA2BE223J VRD-RA2BE471J VRD-RA2BE473J J J J J J J J J J J M J J J R511 VRD-RA2BE393J J R512 R513 VRD-RA2BE683J VRS-CY1JF563J J J R513 VRS-CY1JF273J J R514 R519 R520 R521 R522 R523 VRS-CY1JF101J VRS-CY1JF123J VRS-CY1JF184J VRD-RM2HD152J VRS-RG3AB102J VRN-RL3AB1R0J J J J J M M R523 VRN-RL3AB1R2J M R524 R525 R551 R552 R553 R554 å R604 VRS-RG3AB391J VRS-CY1JF563J VRS-CY1JF472J VRD-RA2BE102J VRS-CY1JF823J VRS-CY1JF183J VRS-RG3LB332J M J J J J J M å R604 VRS-RG3LB222J M R605 R606 å R607 VRD-RM2HD331J VRD-RM2HD271J VRS-RG3LB332J J J M å R607 VRS-RG3LB222J M R609 R610 å R611 å R621 VRS-RG3AB562J VRD-RM2HD220J VRW-KQ41C3R3K VRN-VV3LB2R7J M J J J å R621 VRN-VV3LB1R2J J R622 VRN-RL2HCR56J M R622 VRN-RL2HCR68J M 100 1/16W M-Ox. 100 1/16W M-Ox. 100 1/16W M-Ox. 10k 1/16W M-Ox. 3.3k 1/16W M-Ox. 1.5k 1/16W M-Ox. 1.0k 1/16W M-Ox. 1.8k 1/16W M-Ox. 1.8k 1/16W M-Ox. 1.8k 1/16W M-Ox. 33 1/16W M-Ox. 33 1/16W M-Ox. 33 1/16W M-Ox. 100 1/16W M-Ox. 10k 1W M-Ox. 68k 1/2W Carbon 6.8k 1/4W Carbon (32L-S400, CL32S40) 1.0k 1/16W M-Ox. 6.8k 1/16W M-Ox. 1.5k 1/16W M-Ox. 100 1/16W M-Ox. 100 1/16W M-Ox. 1.0k 1/8W Carbon 100 1/16W M-Ox. 1.0k 1/8W Carbon 6.8k 1/16W M-Ox. 10k 1/16W M-Ox. 2.2 3.0W M-Film 22k 1/8W Carbon 470 1/8W Carbon 47k 1/8W Carbon (36L-S400, CL36S40) 39k 1/8W Carbon (32L-S400, CL32S40) 68k 1/8W Carbon 56k 1/16W M-Ox. (36L-S400, CL36S40) 27k 1/16W M-Ox. (32L-S400, CL32S40) 100 1/16W M-Ox. 12k 1/16W M-Ox. 180k 1/16W M-Ox. 1.5k 1/2W Carbon 1.0k 1W M-Ox. 1.0 1W M-Film (36L-S400, CL36S40) 1.2 1W M-Film (32L-S400, CL32S40) 390 1W M-Ox. 56k 1/16W M-Ox. 4.7k 1/16W M-Ox. 1.0k 1/8W Carbon 82k 1/16W M-Ox. 18k 1/16W M-Ox. 3.3k 3.0W M-Ox. (36L-S400, CL36S40) 2.2k 3W M-Ox. (32L-S400, CL32S40) 330 1/2W Carbon 270 1/2W Carbon 3.3k 3.0W M-Ox. (36L-S400, CL36S40) 2.2k 3W M-Ox. (32L-S400, CL32S40) 5.6k 1W M-Ox. 22 1/2W Carbon 3.3 15W Cement 2.7 3.0W M-Film (36L-S400, CL36S40) 1.2 3.0W M-Film (32L-S400, CL32S40) 0.56 1/2W M-Film (36L-S400, CL36S40) 0.68 1/2W M-Film (32L-S400, CL32S40) Code AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AB AA AA AB AB AB AA AG AB AC AB AA 32L-S400, 36L-S400 CL32S40, CL36S40 Ref. No. Part No. ★ Description Code Ref. No. PWB-A: DUNTK9829WEK0 (32L-S400, CL32S40) PWB-A: DUNTK9829WEK1 (36L-S400, CL36S40) R803 R804 R805 R806 R901 R902 R903 R904 R905 R906 R907 R908 R910 R911 R912 R913 R914 R915 R922 R923 R924 R925 R926 R927 R928 R929 R930 R931 R932 R933 R934 R935 R936 R937 R938 R939 R940 R941 R942 R943 R951 R952 R955 R958 R959 R961 R962 R963 R1401 R1402 R1403 R1404 R1405 R1406 R1408 R1409 R1410 R1411 R1412 R1413 R1414 R1415 R1416 R1417 R1418 R1419 R1420 R1421 R1422 R1423 R1601 R1602 R1603 R1604 R1605 R1606 MAIN UNIT (Continued) å R623 å R624 R625 R631 R632 R633 çå R651 çå R652 VRN-RL3AB1R0J VRS-RG3DB332J VRS-CY1JF102J VRS-CY1JF391J VRS-CY1JF152J VRS-CY1JF472J VRN-RL2HC1R0J VRD-RA2EE393J M M J J J J J J çå R652 VRD-RA2EE103J J çå R653 VRD-RA2EE333J J çå R653 VRD-RA2EE562J J å R654 VRD-RA2EE184J J å R654 VRD-RA2EE393J J å R655 å R658 VRS-CY1JF104J VRS-RG3DB153J J J å R658 VRS-RG3DB123J J VRD-RA2BE222J VRD-RA2BE822J VRS-CY1JF472J VRS-CY1JF472J VRD-RA2BE102J VRS-CY1JF102J VRS-CY1JF222J VRS-CY1JF822J VRS-CY1JF123J VRS-CY1JF102J VRD-RA2BE102J VRS-CY1JF472J VRD-RA2BE562J VRD-RA2EE222J VRS-CY1JF103J VRN-RL3DB3R3J VRS-CY1JF274J VRS-RG3LB561J VRG-RL2HB101J RR-HZ0048CEZZ VRW-KQ4AC1R2K VRS-RG3LB101J VRD-RM2HD154J VRN-RL3DBR22J VRN-RL3DBR22J J J J J J J J J J J J J J J J M J M J J M J J J J å R706 VRN-RL3DBR27J J R707 R709 R710 VRS-RG2HC681J VRN-GA2EB1R0J VRD-RM2HD470J J J J R710 VRD-RM2HD330J J R711 VRD-RA2BE222J VRS-RG3DB153J VRN-RL3DBR39J VRS-RG2HC332J VRS-RG3AB182J VRD-RM2HD102J J J M J J J VRN-RL3LB2R7J VRD-RM2HD124J VRN-RL3DBR56J VRS-CY1JF473J VRS-RG3LB220J VRD-RA2BE332J VRS-CY1JF332J M J M J M J J å å å å å å å R671 R672 R673 R674 R675 R677 R679 R680 R681 R682 R683 R684 R685 R686 R687 R688 R689 R690 R691 R701 R702 R703 R704 R705 R706 å R715 å R723 R724 å R725 R726 å R727 R734 å R737 R751 R755 R801 R802 1.0 1W M-Film 3.3k 2W M-Ox. 1.0k 1/16W M-Ox. 390 1/16W M-Ox. 1.5k 1/16W M-Ox. 4.7k 1/16W M-Ox. 1.0 1/2W M-Film 39k 1/4W Carbon (36L-S400, CL36S40) 10k 1/4W Carbon (32L-S400, CL32S40) 33k 1/4W Carbon (36L-S400, CL36S40) 5.6k 1/4W Carbon (32L-S400, CL32S40) 180k 1/4W Carbon (36L-S400, CL36S40) 39k 1/4W Carbon (32L-S400, CL32S40) 100k 1/16W M-Ox. 15k 2W M-Ox. (36L-S400, CL36S40) 12k 2W M-Ox. (32L-S400, CL32S40) 2.2k 1/8W Carbon 8.2k 1/8W Carbon 4.7k 1/16W M-Ox. 4.7k 1/16W M-Ox. 1.0k 1/8W Carbon 1.0k 1/16W M-Ox. 2.2k 1/16W M-Ox. 8.2k 1/16W M-Ox. 12k 1/16W M-Ox. 1.0k 1/16W M-Ox. 1.0k 1/8W Carbon 4.7k 1/16W M-Ox. 5.6k 1/8W Carbon 2.2k 1/4W Carbon 10k 1/16W M-Ox. 3.3 2W M-Film 270k 1/16W M-Ox. 560 3.0W M-Ox. 100 1/2W Carbon 3.9M 1/2W Carbon 1.2 10W Cement 100 3.0W M-Ox. 150k 1/2W Carbon 0.22 2W M-Film 0.22 2W M-Film (36L-S400, CL36S40) 0.27 2W M-Film (32L-S400, CL32S40) 680 1/2W M-Ox. 1.0 1/4W M-Film 47 1/2W Carbon (36L-S400, CL36S40) 33 1/2W Carbon (32L-S400, CL32S40) 2.2k 1/8W Carbon 15k 2W M-Ox. 0.39 2W M-Film 3.3k 1/2W M-Ox. 1.8k 1W M-Ox. 1.0k 1/2W Carbon (36L-S400, CL36S40) 2.7 3.0W M-Film 120k 1/2W Carbon 0.56 2W M-Film 47k 1/16W M-Ox. 22 3.0W M-Ox. 3.3k 1/8W Carbon 3.3k 1/16W M-Ox. AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AB AC AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AB AA AA 36 Part No. VRS-CY1JF222J VRS-CY1JF222J VRS-CY1JF222J VRS-CY1JF333J VRS-CY1JF104J VRS-CY1JF104J VRD-RA2BE102J VRS-CY1JF683J VRS-CY1JF223J VRS-CY1JF392J VRS-CY1JF182J VRS-CY1JF102J VRD-RA2BE102J VRS-CY1JF683J VRS-CY1JF223J VRS-CY1JF392J VRS-CY1JF182J VRS-CY1JF102J VRS-CY1JF102J VRS-CY1JF102J VRS-CY1JF750J VRS-CY1JF104J VRS-CY1JF104J VRD-RA2EE750J VRD-RA2EE750J VRS-CY1JF101J VRS-CY1JF563J VRS-CY1JF333J VRS-CY1JF102J VRS-CY1JF122J VRS-CY1JF473J VRS-CY1JF101J VRS-CY1JF473J VRS-CY1JF102J VRS-CY1JF122J VRS-CY1JF122J VRS-CY1JF122J VRS-CY1JF183J VRS-CY1JF273J VRS-CY1JF102J VRS-CY1JF101J VRS-CY1JF101J VRS-CY1JF101J VRD-RA2BE102J VRD-RA2BE102J VRD-RA2BE101J VRD-RA2BE101J VRD-RA2BE331J VRS-CY1JF103J VRS-CY1JF103J VRS-CY1JF182J VRS-CY1JF102J VRS-CY1JF392J VRS-CY1JF102J VRS-CY1JF821J VRS-CY1JF101J VRS-CY1JF681J VRS-CY1JF101J VRS-CY1JF821J VRD-RA2BE471J VRS-CY1JF102J VRS-CY1JF821J VRS-CY1JF122J VRS-CY1JF273J VRS-CY1JF153J VRS-CY1JF101J VRS-CY1JF222J VRS-CY1JF562J VRS-CY1JF101J VRS-CY1JF471J VRS-CY1JF101J VRS-CY1JF103J VRS-CY1JF103J VRS-CY1JF152J VRS-CY1JF391J VRS-CY1JF471J ★ Description J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 2.2k 2.2k 2.2k 33k 100k 100k 1.0k 68k 22k 3.9k 1.8k 1.0k 1.0k 68k 22k 3.9k 1.8k 1.0k 1.0k 1.0k 75 100k 100k 75 75 100 56k 33k 1.0k 1.2k 47k 100 47k 1.0k 1.2k 1.2k 1.2k 18k 27k 1.0k 100 100 100 1.0k 1.0k 100 100 330 10k 10k 1.8k 1.0k 3.9k 1.0k 820 100 680 100 820 470 1.0k 820 1.2k 27k 15k 100 2.2k 5.6k 100 470 100 10k 10k 1.5k 390 470 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/8W 1/16W 1/16W 1/16W 1/16W 1/16W 1/8W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/4W 1/4W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/8W 1/8W 1/8W 1/8W 1/8W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/8W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. Carbon M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. Carbon M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. Carbon Carbon M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. Carbon Carbon Carbon Carbon Carbon M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. Carbon M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. Code AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA 32L-S400, 36L-S400 CL32S40, CL36S40 Ref. No. ★ Part No. Description Code Ref. No. PWB-A: DUNTK9829WEK0 (32L-S400, CL32S40) PWB-A: DUNTK9829WEK1 (36L-S400, CL36S40) VRS-CY1JF221J VRS-CY1JF681J VRS-CY1JF122J VRD-RA2BE562J VRD-RA2BE102J VRD-RA2BE473J VRS-CY1JF103J VRD-RA2BE102J VRD-RA2BE102J VRS-CY1JF102J VRS-CY1JF471J VRS-CY1JF223J VRD-RA2BE223J VRD-RA2BE682J VRD-RA2BE682J VRD-RA2BE682J VRD-RA2BE682J VRD-RA2BE102J VRD-RA2BE102J VRD-RA2BE103J VRD-RA2BE223J VRS-CY1JF102J VRS-CY1JF333J VRS-CY1JF101J VRS-CY1JF333J VRS-CY1JF682J VRS-CY1JF101J VRD-RA2BE101J VRS-CY1JF221J VRS-CY1JF562J VRS-CY1JF221J VRS-CY1JF562J VRD-RA2BE183J VRS-CY1JF222J VRD-RA2BE332J VRS-CY1JF102J VRS-CY1JF102J VRD-RA2BE102J VRS-CY1JF102J VRS-CY1JF101J VRS-CY1JF101J VRD-RA2BE222J VRS-CY1JF103J VRD-RA2BE184J VRD-RA2BE222J VRS-CY1JF682J VRS-CY1JF333J VRS-CY1JF101J VRS-CY1JF101J VRS-CY1JF101J VRS-CY1JF101J VRS-CY1JF823J VRD-RA2BE221J VRD-RA2BE221J VRS-CY1JF105J VRS-CY1JF104J VRS-CY1JF623J VRS-CY1JF332J VRS-CY1JF302J VRS-CY1JF392J VRS-CY1JF102J VRS-CY1JF102J VRD-RA2BE102J VRD-RA2BE102J VRS-CY1JF225J VRS-CY1JF103J VRD-RA2BE103J S502 QSW-B0015CEZZ J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J 220 680 1.2k 5.6k 1.0k 47k 10k 1.0k 1.0k 1.0k 470 22k 22k 6.8k 6.8k 6.8k 6.8k 1.0k 1.0k 10k 22k 1.0k 33k 100 33k 6.8k 100 100 220 5.6k 220 5.6k 18k 2.2k 3.3k 1.0k 1.0k 1.0k 1.0k 100 100 2.2k 10k 180k 2.2k 6.8k 33k 100 100 100 100 82k 220 220 1.0M 100k 62k 3.3k 3.0k 3.9k 1.0k 1.0k 1.0k 1.0k 2.2M 10k 10k 1/16W 1/16W 1/16W 1/8W 1/8W 1/8W 1/16W 1/8W 1/8W 1/16W 1/16W 1/16W 1/8W 1/8W 1/8W 1/8W 1/8W 1/8W 1/8W 1/8W 1/8W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/8W 1/16W 1/16W 1/16W 1/16W 1/8W 1/16W 1/8W 1/16W 1/16W 1/8W 1/16W 1/16W 1/16W 1/8W 1/16W 1/8W 1/8W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/8W 1/8W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/8W 1/8W 1/16W 1/16W 1/8W M-Ox. M-Ox. M-Ox. Carbon Carbon Carbon M-Ox. Carbon Carbon M-Ox. M-Ox. M-Ox. Carbon Carbon Carbon Carbon Carbon Carbon Carbon Carbon Carbon M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. Carbon M-Ox. M-Ox. M-Ox. M-Ox. Carbon M-Ox. Carbon M-Ox. M-Ox. Carbon M-Ox. M-Ox. M-Ox. Carbon M-Ox. Carbon Carbon M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. Carbon Carbon M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. Carbon Carbon M-Ox. M-Ox. Carbon Description Code MISCELLANEOUS PARTS FB601 RBLN-0047CEZZ FB671 RBLN-0047CEZZ FB701 RBLN-0037CEZZ FB702 RBLN-0036CEZZ FB704 RBLN-0037CEZZ FB706 RBLN-0037CEZZ FH701 QFSHD1013CEZZ FH702 QFSHD1014CEZZ J921 QSOCD0430CEZZ P351 QPLGN0461CEZZ P401 QPLGN0561CEZZ P601 QPLGN0161FJZZ P621 QPLGN0461CEZZ P651 QPLGN0361CEZZ P701 QPLGN0404CEZZ P703 QPLGN0269GEZZ P901 QPLGN0661CEZZ P2002 QPLGN0461CEZZ P2401 QPLGN0561CEZZ HM601 LX-GZ3001PEZZ HM602 LX-GZ3001PEZZ HM603 LX-GZ3001PEZZ HM604 LX-GZ3001PEZZ HM605 LX-GZ3001PEZZ HM606 LX-GZ3001PEZZ HM607 LX-GZ3002PEZZ HM609 LX-GZ3002PEZZ HM611 LX-GZ3002PEZZ HM613 LX-GZ3001PEZZ HM614 LX-GZ3001PEZZ HM615 LX-GZ3001PEZZ HM616 LX-GZ3001PEZZ HM621 LX-GZ3001PEZZ HM623 LX-GZ3001PEZZ HM624 LX-GZ3002PEZZ HM625 LX-GZ3002PEZZ HM626 LX-GZ3001PEZZ HM627 LX-GZ3001PEZZ HM628 LX-GZ3001PEZZ HM630 LX-GZ3002PEZZ HM631 LX-GZ3002PEZZ HM632 LX-GZ3002PEZZ HM633 LX-GZ3002PEZZ HM634 LX-GZ3002PEZZ HM635 LX-GZ3001PEZZ HM636 LX-GZ3001PEZZ HM701 LX-GZ3001PEZZ HM702 LX-GZ3001PEZZ HM703 LX-GZ3001PEZZ HM706 LX-GZ3001PEZZ HM707 LX-GZ3001PEZZ HM708 LX-GZ3001PEZZ HM709 LX-GZ3001PEZZ HM720 LX-GZ3001PEZZ HM721 LX-GZ3001PEZZ HM724 LX-GZ3001PEZZ HM725 LX-GZ3001PEZZ HM727 LX-GZ3001PEZZ HM728 LX-GZ3001PEZZ HM729 LX-GZ3001PEZZ RDA361 PRDAR5006MEFW RDA501 PRDAR0234PEFW RDA601 PRDAR0150PEFW RDA671 PRDAR1007MEFW RDA701 PRDAR1006MEFW RDA750 PRDAR5072CEFW TAN921 QTANJ0523CEZZ LX-BZ3049GEFD LX-HZ3007MEFD AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA SWITCH J Vertical Center ★ å RY701 RRLYJ0081CEZZ å F701 QFS-B5023CEZZ MAIN UNIT (Continued) R1607 R1608 R1609 R2001 R2003 R2004 R2006 R2008 R2009 R2010 R2012 R2020 R2023 R2024 R2025 R2026 R2027 R2028 R2029 R2032 R2033 R2040 R2041 R2042 R2043 R2044 R2045 R2046 R2047 R2048 R2060 R2061 R2062 R2063 R2064 R2069 R2071 R2072 R2073 R2101 R2102 R2201 R2202 R2203 R2211 R2212 R2213 R2401 R2402 R2403 R2404 R2507 R3001 R3002 R3003 R3004 R3005 R3007 R3008 R3010 R3011 R3012 R3017 R3018 R3201 R3202 R3203 Part No. AC 37 J J J J J J J J J J J J J M J J J J J J J R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R M R R M M J M J M Relay Fuse, 5A 125V Ferrite Bead Ferrite Bead Ferrite Bead Ferrite Bead Ferrite Bead Ferrite Bead Fuse Holder Fuse Holder Socket, S-Video Plug 4-pin (S) Plug 5-pin (GBN) Plug 6-pin (K) Plug 4-pin (YBN) Plug 3-pin Plug 4-pin (M) Plug 2-pin (P) Plug 6-pin (EJ) Plug 4-pin (YR) Plug 5-pin Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Screw Heat Sink IC361 Heat Sink IC501 Heat Sink Q602 Heat Sink Q673 Heat Sink IC701 Heat Sink IC751 AV Terminal Screw Screw AL AC AB AB AB AB AB AB AC AC AE AB AB AB AB AB AB AD AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AB AC AH AL AF AF AC AA 32L-S400, 36L-S400 CL32S40, CL36S40 Ref. No. ★ Part No. Description Code Ref. No. PWB-B: DUNTK9303WEK3(32L-S400, CL32S40) PWB-B: DUNTK9303WEK4(36L-S400, CL36S40) R884 R885 R886 R887 R888 R891 R892 R894 R895 CRT UNIT TRANSISTORS Q850 Q851 Q852 Q853 Q854 Q855 Q894 VS2SC4544LB2E VS2SC4544LB2E VS2SC4544LB2E VS2SC3198-Y-1 VS2SC3198-Y-1 VS2SC3198-Y-1 VS2SA1266-Y-1 D850 D851 D852 D894 D895 D896 D897 D898 VHD1SS119//-1 VHD1SS119//-1 VHD1SS119//-1 VHD1SS119//-1 VHD1SS119//-1 RH-EX0616GEZZ VHD1SS119//-1 VHD1SS119//-1 L852 L853 L854 VP-MK221K0000 VP-MK221K0000 VP-MK221K0000 J J J J J J J 2SC4544 2SC4544 2SC4544 2SC3198(Y) 2SC3198(Y) 2SC3198(Y) 2SA1266(Y) AD AD AD AA AA AA AA Diode Diode Diode Diode Diode Zener Diode Diode Diode SC801 QSOCV0937CEZZ COILS AB AB AB CAPACITORS C850 C851 C876 C877 C878 C880 C892 C893 C895 [EL.··· Electrolytic] VCKYPA1HF103Z J 0.01 VCEA0A1CW476M J 47 VCCSPA1HL561J J 560p VCCSPA1HL471J J 470p VCCSPA1HL561J J 560p RC-KZ0153CEZZ J 0.01 VCEA0A1CW106M J 10 VCEA0A1CW106M J 10 VCEA0A1CW226M J 22 50V 16V 50V 50V 50V 3kV 16V 16V 16V Ceramic EL. Ceramic Ceramic Ceramic Ceramic EL. EL. EL. AA AB AA AA AA AB AB AB AB RESISTORS R840 å å å å å å R849 R850 R851 R852 R854 R855 R856 R857 R858 R859 R860 R861 R862 R863 R864 R868 R870 R871 R872 R873 R874 R875 R876 R877 R878 R880 R881 R882 R883 [M-Ox.··· Metal Oxide] VRD-RM2HD104J J 100k 1/2W Carbon (36L-S400, CL36S40) VRD-RA2BE151J J 150 1/8W Carbon VRD-RA2BE561J J 560 1/8W Carbon VRD-RA2BE561J J 560 1/8W Carbon VRD-RA2BE561J J 560 1/8W Carbon VRD-RA2BE151J J 150 1/8W Carbon VRD-RA2BE151J J 150 1/8W Carbon VRD-RA2BE121J J 120 1/8W Carbon VRD-RA2BE121J J 120 1/8W Carbon VRD-RA2BE121J J 120 1/8W Carbon VRS-VV3DB273J J 27k 2W M-Ox. VRS-VV3DB273J J 27k 2W M-Ox. VRS-VV3DB273J J 27k 2W M-Ox. VRS-VV3DB273J J 27k 2W M-Ox. VRS-VV3DB273J J 27k 2W M-Ox. VRS-VV3DB273J J 27k 2W M-Ox. VRD-RM2HD224J J 220k 1/2W Carbon VRD-RA2BE471J J 470 1/8W Carbon VRD-RA2BE471J J 470 1/8W Carbon VRD-RA2BE471J J 470 1/8W Carbon VRD-RA2BE220J J 22 1/8W Carbon VRD-RA2BE220J J 22 1/8W Carbon VRD-RA2BE220J J 22 1/8W Carbon VRD-RA2BE121J J 120 1/8W Carbon VRD-RA2BE121J J 120 1/8W Carbon VRD-RA2BE121J J 120 1/8W Carbon VRC-MA2HG332K J 3.3k 1/2W Solid VRC-MA2HG332K J 3.3k 1/2W Solid VRC-MA2HG332K J 3.3k 1/2W Solid VRD-RA2BE221J J 220 1/8W Carbon VRD-RA2BE221J VRD-RA2BE221J VRD-RA2BE471J VRD-RA2BE471J VRD-RA2BE471J VRD-RA2BE561J VRD-RA2BE331J VRD-RA2BE152J VRD-RA2EE561J Description J J J J J J J J J 220 220 470 470 470 560 330 1.5k 560 1/8W 1/8W 1/8W 1/8W 1/8W 1/8W 1/8W 1/8W 1/4W Carbon Carbon Carbon Carbon Carbon Carbon Carbon Carbon Carbon Code AA AA AA AA AA AA AA AA AA MISCELLANEOUS PARTS AB AB AB AB AB AA AB AB J Peaking 220µH J Peaking 220µH J Peaking 220µH ★ P860 QPLGN0461CEZZ P880 QPLGN0561CEZZ SC801 QSOCV1011CEZZ DIODES J J J J J J J J Part No. AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA 38 J Plug 4-pin (YBN) J Plug 5-pin (GBN) M CRT Socket (36L-S400, CL36S40) J CRT Socket (32L-S400, CL32S40) AB AB AF 32L-S400, 36L-S400 CL32S40, CL36S40 Ref. No. ★ Part No. Description Code Ref. No. PWB-R: DUNTK9511WEK2 P-IN-P UNIT INTEGRATED CIRCUITS IC1701 VHiMM1117XF1E IC1781 VHiKA7805Pi-1 IC1801 VHiM65667FP-2 M MM1117XFBE R KA7805PI M M65667FP AE TRANSISTORS You can subsitute "VS2SD601AR/-1" for "VS2SC2462-C-1" and "VS2SC2412-C-1". Q1721 VS2SD601AR/-1 J 2SD601 AC Q1741 VS2SB709AR/-1 J 2SB709 AC Q1742 VS2SB709AR/-1 J 2SB709 AC Q1761 VS2SB709AR/-1 J 2SB709 AC Q1762 VS2SB709AR/-1 J 2SB709 AC Q1791 VS2SC1959Y/1E J 2SC1959 AC Q1861 VS2SB709AR/-1 J 2SB709 AC Q1881 VS2SD601AR/-1 J 2SD601 AC Q1882 VS2SD601AR/-1 J 2SD601 AC Q1883 VS2SD601AR/-1 J 2SD601 AC J Zener Diode J Diode J Diode AB AB AB CRYSTAL X1861 RCRSB0241CEZZ M Crystal COILS L1721 L1801 L1821 L1861 L1862 L1863 VP-XF680K0000 VP-XF100K0000 VP-XF100K0000 VP-XF100K0000 VP-XF100K0000 VP-XF100K0000 J J J J J J Peaking 68µH Peaking 10µH Peaking 10µH Peaking 10µH Peaking 10µH Peaking 10µH AB AB AB AB AB AB CAPACITORS C1701 C1702 C1703 C1721 C1722 C1741 C1742 C1743 C1761 C1762 C1763 C1781 C1791 C1792 C1801 C1802 C1803 C1804 C1805 C1806 C1807 C1809 C1810 C1811 C1812 C1821 C1822 C1841 C1842 C1843 C1845 C1846 [EL.··· Electrolytic] VCEA0A1HW475M J 4.7 VCEA0A1HW475M J 4.7 VCEA0A1HW475M J 4.7 VCEA0A1HW106M J 10 VCCCCY1HH330J J 33p RC-QZA473TAYJ J 0.047 VCEA0A1HW105M J 1.0 RC-QZA472TAYJ J 4700p RC-QZA473TAYJ J 0.047 VCEA0A1HW105M J 1.0 RC-QZA682TAYJ J 6800p VCEA0A1CW476M J 47 VCEA0A1AW107M J 100 VCEA0A1AW107M J 100 VCKYCY1CB104K J 0.1 VCKYCY1HB103K J 0.01 VCKYCY1HB103K J 0.01 VCKYCY1HF103Z J 0.01 VCEA0A1HW106M J 10 VCKYCY1CB104K J 0.1 VCKYCY1HB103K J 0.01 VCKYCY1HB103K J 0.01 VCEA0A1CW226M J 22 VCKYCY1HF103Z J 0.01 VCEA0A1HW106M J 10 VCKYCY1HF103Z J 0.01 VCEA0A1HW106M J 10 VCEA0A1HW106M J 10 VCKYCY1HF103Z J 0.01 VCCCCY1HH680J J 68p VCKYCY1HB103K J 0.01 VCCCCY1HH151J J 150p 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 16V 10V 10V 16V 50V 50V 50V 50V 16V 50V 50V 16V 50V 50V 50V 50V 50V 50V 50V 50V 50V EL. EL. EL. EL. Ceramic Mylar EL. Mylar Mylar EL. Mylar EL. EL. EL. Ceramic Ceramic Ceramic Ceramic EL. Ceramic Ceramic Ceramic EL. Ceramic EL. Ceramic EL. EL. Ceramic Ceramic Ceramic Ceramic ★ Description C1847 C1848 C1849 C1850 C1851 C1861 C1862 C1863 C1865 C1866 C1867 C1868 C1869 C1870 C1871 C1872 VCKYCY1HB103K VCKYCY1CB104K VCEA0A1HW106M VCKYCY1CB104K VCKYCY1HF103Z VCKYCY1CB104K VCKYCY1CB104K VCCCCY1HH101J RC-QZA154TAYJ RC-QZA103TAYJ VCKYCY1CB104K VCFYSA1HB474J VCKYCY1HF103Z VCEA0A1HW106M VCEA0A1HW106M VCKYCY1HF103Z J J J J J J J J J J J J J J J J 0.01 0.1 10 0.1 0.01 0.1 0.1 100p 0.15 0.01 0.1 0.47 0.01 10 10 0.01 50V 16V 50V 16V 50V 16V 16V 50V 50V 50V 16V 50V 50V 50V 50V 50V RJ1 RJ2 RJ3 RJ4 RJ5 RJ6 RJ7 RJ8 RJ9 RJ10 RJ11 R1701 R1702 R1703 R1704 R1705 R1706 R1721 R1722 R1723 R1724 R1741 R1742 R1743 R1744 R1745 R1746 R1747 R1761 R1762 R1763 R1764 R1765 R1766 R1791 R1801 R1821 R1822 R1823 R1825 R1828 R1831 R1832 R1833 R1834 R1841 R1842 R1843 R1861 R1862 R1863 R1864 R1865 R1866 R1867 R1868 [M-Ox.··· Metal Oxide] VRS-CY1JF000J J 0 1/16W VRS-CY1JF000J J 0 1/16W VRS-CY1JF000J J 0 1/16W VRS-CY1JF000J J 0 1/16W VRS-CY1JF000J J 0 1/16W VRS-CY1JF000J J 0 1/16W VRS-CY1JF000J J 0 1/16W VRS-CY1JF000J J 0 1/16W VRS-CY1JF000J J 0 1/16W VRS-CY1JF000J J 0 1/16W VRS-CY1JF000J J 0 1/16W VRS-CY1JF101J J 100 1/16W VRS-CY1JF102J J 1.0k 1/16W VRS-CY1JF101J J 100 1/16W VRS-CY1JF102J J 1.0k 1/16W VRS-CY1JF101J J 100 1/16W VRS-CY1JF474J J 470k 1/16W VRS-CY1JF332J J 3.3k 1/16W VRS-CY1JF103J J 10k 1/16W VRS-CY1JF822J J 8.2k 1/16W VRS-CY1JF222J J 2.2k 1/16W VRD-RA2BE102J J 1.0k 1/8W VRS-CY1JF102J J 1.0k 1/16W VRS-CY1JF151J J 150 1/16W VRS-CY1JF122J J 1.2k 1/16W VRS-CY1JF474J J 470k 1/16W VRS-CY1JF122J J 1.2k 1/16W VRD-RA2BE822J J 8.2k 1/8W VRS-CY1JF102J J 1.0k 1/16W VRS-CY1JF151J J 150 1/16W VRS-CY1JF102J J 1.0k 1/16W VRS-CY1JF122J J 1.2k 1/16W VRS-CY1JF474J J 470k 1/16W VRS-CY1JF122J J 1.2k 1/16W VRD-RA2BE151J J 150 1/8W VRS-CY1JF473J J 47k 1/16W VRS-CY1JF123J J 12k 1/16W VRS-CY1JF103J J 10k 1/16W VRS-CY1JF183J J 18k 1/16W VRS-CY1JF183J J 18k 1/16W VRS-CY1JF153J J 15k 1/16W VRS-CY1JF332J J 3.3k 1/16W VRS-CY1JF682J J 6.8k 1/16W VRS-CY1JF272J J 2.7k 1/16W VRS-CY1JF222J J 2.2k 1/16W VRS-CY1JF153J J 15k 1/16W VRS-CY1JF471J J 470 1/16W VRS-CY1JF391J J 390 1/16W VRS-CY1JF153J J 15k 1/16W VRS-CY1JF102J J 1.0k 1/16W VRS-CY1JF102J J 1.0k 1/16W VRS-CY1JF221J J 220 1/16W VRS-CY1JF474J J 470k 1/16W VRS-CY1JF104J J 100k 1/16W VRS-CY1JF202J J 2.0k 1/16W VRS-CY1JF510J M 51 1/16W Code Ceramic Ceramic EL. Ceramic Ceramic Ceramic Ceramic Ceramic Mylar Mylar Ceramic Mylar Ceramic EL. EL. Ceramic AA AB AB AB AA AB AB AA AC AB AB AC AA AB AB AA M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. Carbon M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. Carbon M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. Carbon M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA RESISTORS DIODES D1791 RH-EX0604GEZZ D1801 VHD1SS119//-1 D1821 VHD1SS119//-1 Part No. AB AB AB AB AA AB AB AB AB AB AB AB AB AB AB AA AA AA AB AB AA AA AB AA AB AA AB AB AA AA AA AA 39 32L-S400, 36L-S400 CL32S40, CL36S40 Ref. No. Part No. ★ Description Code Ref. No. ★ Part No. Description PWB-R: DUNTK9511WEK2 PWB-F: DUNTK9514WEK0 P-IN-P UNIT (Continued) CONTROL UNIT R1881 R1882 R1883 R1884 R1885 R1886 R1887 R1889 VRS-CY1JF473J VRS-CY1JF223J VRS-CY1JF123J VRS-CY1JF101J VRS-CY1JF473J VRS-CY1JF223J VRS-CY1JF123J VRD-RA2BE101J J J J J J J J J 47k 22k 12k 100 47k 22k 12k 100 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/8W M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. M-Ox. Carbon AA AA AA AA AA AA AA AB CAPACITOR [EL.··· Electrolytic] C4001 VCEA0A1HW475M J 4.7 J J J M Plug 8-pin Plug 6-pin Plug 8-pin Shield 50V EL. AB Carbon Carbon Carbon Carbon Carbon Carbon Carbon Carbon Carbon AA AA AA AA AA AA AA AA AA RESISTORS MISCELLANEOUS PARTS P1701 QPLGZ0810CEZZ P1702 QPLGZ0610CEZZ P1703 QPLGZ0810CEZZ SLD1801 PSLDM0012MEFW Code AD AB AD AC R4001 R4003 R4004 R4005 R4006 R4007 R4008 R4009 R4010 VRD-RA2BE103J VRD-RA2BE273J VRD-RA2BE563J VRD-RA2BE331J VRD-RA2BE563J VRD-RA2BE123J VRD-RA2EE750J VRD-RA2BE153J VRD-RA2BE272J S4001 S4002 S4003 S4004 S4005 QSW-K0079GEZZ QSW-K0079GEZZ QSW-K0079GEZZ QSW-K0079GEZZ QSW-K0079GEZZ J4001 J4002 J4003 P4001 P4003 QJAKE0179CEZZ QJAKE0180CEZZ QJAKE0181CEZZ QPLGN0461CEZZ QPLGN0661CEZZ RRMCU0230CEZZ QCNW-0176MEZZ QCNW-0179MEZZ J J J J J J J J J 10k 27k 56k 330 56k 12k 75 15k 2.7k 1/8W 1/8W 1/8W 1/8W 1/8W 1/8W 1/4W 1/8W 1/8W SWITCHES J J J J J Power CH-UP CH-DOWN VOL-UP VOL-DOWN AB AB AB AB AB MISCELLANEOUS PARTS RMC4001 40 M M M J J M M M Audio In (L) Audio In (R) Video In 4-pin (YR) 6-pin (EJ) R/C Receiver Connecting Cord Connecting Cord AB AD AE AH 32L-S400, 36L-S400 CL32S40, CL36S40 Ref. No. Part No. ★ Description Code Ref. No. MISCELLANEOUS PARTS å ACC701 QACCD3065CESA QCNW-0143MEZZ QCNW-0144MEZZ QCNW-0178MEZZ QCNW-0145MEZZ SP1 SP2 VSP1206PB378E VSP1206PB378E M M M M AC Cord Connecting Cord Connecting Cord Connecting Cord (32L-S400, CL32S40) M Connecting Cord (36L-S400, CL36S40) M Speaker 6 ohm (L) M Speaker 6 ohm (R) ★ Part No. Description Code CABINET PARTS AN AF AD AD 32L-S400, CL32S40 AE 1 1-1 1-2 1-3 1-4 CCABA1300MES1 Not Available GCOVA1039MEKA HBDGB1009MESA JBTN-1105MEKA M – M M M Front Cabinet Ass'y Front Cabinet Cover for R/C Badge,"SHARP" Button, Power, Vol-up/down, CH-up/down 2 GCABB1134MEKA M Rear Cabinet 1 1-1 1-2 1-3 1-4 CCABA1301MES1 Not Available GCOVA1039MEKA HBDGB1010MESA JBTN-1105MEKA 2 GCABB1137MEKA M Rear Cabinet BL — AD AD AE BF 36L-S400, CL36S40 SUPPLIED ACCESORRIES TGAN-1006MEZZ M Guarantee Card (32L-S400, 36L-S400) TiNS-6559MEZZ M Operation Manual RRMCG1396CESA M Infrared R/C Unit M – M M M Front Cabinet Ass'y Front Cabinet Cover for R/C Badge, "SHARP" Button, Power, Vol-up/down, CH-up/down BK AA AD AW 1 1-1 2 PACKING PARTS (NOT REPLACEMANT ITEM) SPAKC0636MEZZ SPAKC0629MEZZ SPAKX0171MEZZ SPAKX0172MEZZ SSAKA0004MEZZ – Packing Case (32L-S400, CL32S40) – Packing Case (36L-S400, CL36S40) – Buffer Material (32L-S400, CL32S40) – Buffer Material (36L-S400, CL36S40) – Polyethylene Sack 1-4 — — — — — 41 1-2 1-3 1-4 BQ — AD AD AE 32L-S400, 36L-S400 CL32S40, CL36S40 Ref. No. Part No. ★ Description Code Ref. No. ★ Part No. Description Code PACKING OF THE SET ★ Polyethylene Bag Operation Manual Registration Card Infrared R/C Unit ★ Batteries ★ Polyethylene Mat ★Buffer Material FRONT ★ Packing Case Use 22 staples fix the packing case. REAR ★ MARK : Not replacement items. ★ Bar Code Label 42 32L-S400, 36L-S400 CL32S40, CL36S40 Ref. No. Part No. ★ Description Code Ref. No. 43 Part No. ★ Description Code 32L-S400, 36L-S400 CL32S40, CL36S40 Ref. No. Part No. ★ Description Code Ref. No. ★ Part No. Description Code COPYRIGHT © 1999 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. SHARP CORPORATION AV Systems Group Quality & Reliability Control Center Yaita, Tochigi 329-2193, Japan TQ0629-S Apr. 1999 Printed in Japan KI. KG 44