Download HIAC ROC

Table of contents
Specifications on page 3
Data management on page 15
General information on page 4
Maintenance on page 18
Installation on page 7
Troubleshooting on page 19
User interface and navigation on page 11
Replacement parts and accessories on page 21
Operation on page 12
Specifications
Specifications are subject to change without notice.
Specification
Details
Dimensions (L x W x H)
8.9 x 10.7 x 8.9 cm (3.5 x 4.2 x 3.5 in.)
Enclosure
IP 66
Fitting connections
SAE -4; SAE -8
Power requirements
9 to 33 VDC, 150 mA
Storage temperature
–40 to 85 °C (–40 to 185 °F)
Operating temperature
–10 to 60 °C (–14 to 140 °F)
Altitude limit
2000 m (6562 ft)
Overvoltage category
I
Pollution degree
4
Protection class
III
Light source
Laser diode, Class I
Particle size/channel
4, 6, 14 and 21 μm (ISO MTD)
Storage/operating humidity
97% relative humidity, non-condensing
Fluid compatibility
Hydraulic and lubrication oils, mineral, synthetic (phosphate ester
compatible)
Fluid viscosity
2 to 424 cSt1
Reports
ISO 4406, NAS 1638 and SAE AS4059 cleanliness codes
Wetted materials
Bronze, aluminum (anodized), steel, stainless steel, sapphire, Aflas
Performance verification
Optional validation certificate available (±0.5 ISO code with ISO
MTD at 2.8 mg/L concentration at 100 mL/min)
Weight
746 grams (2 lb)
Serial interface
RS232 and RS485, 9600 or 19200 Baud, 8 data bits, no parity,
1 stop bit
Communication protocol
MODBUS RTU
Flow rate for ROC-01, ROC-11, ROC-31,
ROC-41, ROC-61, ROC-71, ROC-81,
ROC-91
50 to 500 mL/min (0.01 to 0.1 gal/min)
Flow rate for ROC-21, ROC-51
3.8 to 38 L/min (1 to 10 gal/min)
®
English 3