Download tv explorer hd / hdle
Transcript
USER’S MANUAL. TV EXPLORER HD / HDLE 5.14 Selecting the Measurements The types of measurements available depend on the operating band (terrestrial or satellite) and the type of signals (analogue or digital). Terrestrial band - Analogue channels: Level Level measurement of the currently tuned carrier. Video / Audio Video carrier to audio carrier ratio. C/N Ratio between the modulated signal power and the equivalent noise power for a same bandwidth. (according to TV standard) FM Deviation Measure the frequency peak deviation for any modulated analogue carrier in FM. Terrestrial band - Digital channels (DVB-C and DVB-T/H): Channel power Channel power is measured assuming that power spectral density is uniform throughout channel bandwidth. To measure it correctly it is indispensable to define the Channel BW. C/N Out-channel measurement. Noise level is measured at fnoise= ftuning ± ½*Channel BW. To measure it correctly digital channel must be tuned at its central frequency. MER Modulation error ratio with noise margin indication. CBER BER measurement (Bit error rate) for the digital signal before error correction (BER before FEC). VBER BER measurement (Bit error rate) for the digital signal after error correction (BER after Viterbi). Satellite band - Analogue channels Level Level measurement of the currently tuned carrier. C/N Ratio between the modulated signal power and the equivalent noise power for a same bandwidth. Page 48 12/2013