Download E9NC-TA0

10.
Enabling 4 to 13
11.
12.
Eco on
The indicators (white digital) turn OFF.
They turn ON for approx. 10 seconds and then turn OFF
by button operation.
ec%
Eco function LO
l%
Eco Lo
They turn ON for approx. 10 seconds and then
the indicators (white digital) turn ON
with low brightness.
500
13.
Suitability for Use
Turn off the power supply, check whether the Communication
Unit compatible wire-saving connector is short circuited or not,
and then turn on the power supply again.
Turn on the power supply again.
If the restoration fails, reset the settings.
Model
Control output
Display resolution
Connection method
Power supply voltage
Power consumption
E9NC-TA0
2
Minimum 0.1μm
Communication Unit compatible wire-saving connector
Supplied from the connector through the communications units.
Power supply voltage 24V:Normal mode: 2040mW max.(Power consumption 85mA max.)
Eco function ON: 1800mW max.(Power consumption 75mA max.)
Eco function LO: 1920mW max.(Power consumption 80mA max.)
Please refer to the specification of a communication unit.
Control output
Power supply reverse polarity protection, output short-circuit protection
Protection circuit
Operating: 1 to 2 amplifiers connected: 0℃ to 55℃, 3 to 10 amplifiers connected: 0℃ to 50℃,
Ambient temperature
11 to 16 amplifiers connected: 0℃ to 45℃, 17 to 30 amplifiers connected: 0℃ to 40℃
range
Storage: -30℃ to 70℃ (with no icing or condensation)
Ambient humidity range Operating and storage: 35% to 85% RH (with no condensation)
20 MΩ min. (at 500 VDC)
Insulation resistance
1,000 VAC, 50/60 Hz, 1 minute
Dielectric strength
10 to 55 Hz with a 1.5-mm double amplitude for 2 hrs each in X and Y directions
Vibration resistance
150 m/s2, for 3 times each in X, Y and Z directions
Shock resistance
Weight (packed state/sensor) Approx. 65 g/Approx. 25 g
Case and cover: Polycarbonate (PC)
Materials
Omron Companies shall not be responsible for conformity with any standards,
codes or regulations which apply to the combination of the Product in the
Buyer’s application or use of the Product. At Buyer’s request, Omron will
provide applicable third party certification documents identifying ratings and
limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in
combination with the end product, machine, system, or other application or
use. Buyer shall be solely responsible for determining appropriateness of the
particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
See also Product catalog for Warranty and Limitation of Liability.
OMRON Corporation
Tokyo, JAPAN
Industrial Automation Company
Contact: www.ia.omron.com
Regional Headquarters
OMRON EUROPE B.V.
Sensor Business Unit
Carl-Benz-Str. 4, D-71154 Nufringen, Germany
Tel: (49) 7032-811-0/Fax: (49) 7032-811-199
OMRON ELECTRONICS LLC
2895 Greenspoint Parkway, Suite 200
Hoffman Estates, IL 60169 U.S.A.
Tel: (1) 847-843-7900/Fax: (1) 847-843-7787
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011/Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200
D s Oct, 2 0 1 4
E9NC-TA0