Download 8038303

Transcript
OVEM
Features
Code
Specification
Pressure sensor, electrical
switching output
-2P
-2N
-PU
-PI
-NU
-NI
-B
-W
-H
2 switching outputs PNP
2 switching outputs NPN
1 switching output PNP, 1 analogue output 0 … 10 V
1 switching output PNP, 1 analogue output 4 … 20 mA
1 switching output NPN, 1 analogue output 0 … 10 V
1 switching output NPN, 1 analogue output 4 … 20 mA
Bar (-B), inches Hg (-BN)
bar
Inches H2O
Inch Hg
Alternative vacuum display
Tab. 1
2
Overview of variants
Fast commissioning with factory setting
The vacuum suction nozzle is shipped with the following factory settings:
Air-saving function with -CE/-OE: active
Switching characteristics of the electrical output: threshold value comparator
Switching element function of the electrical output: NO (normally open)
Additional factory settings è chapter 12.1, page 103
1. Mount the vacuum suction nozzle (è chapter 5.1, page 72).
2. Connect the vacuum suction nozzle pneumatically (è chapter 5.2, page 74).
3. Connect the vacuum suction nozzle electrically (è chapter 5.3, page 74).
è The vacuum suction nozzle can be placed in operation.
If you do not wish to use the factory setting, you can manually define a switching point for Out A or
Out B as follows: (è chapter 6.3.2, page 86). You can also teach switching points (è chapter 6.4.1,
page 90).
62
Festo – OVEM – 1407c English