Download 8038303

Transcript
OVEM
3.6
Measured variables
Vacuum
Measurement takes place continuously between the vacuum port and filter (measurement signal
In A1).
Minimum/maximum value
The minimum and maximum measured pressure values (vacuum) are saved in the vacuum suction
nozzle. The values are lost if the supply voltage to the vacuum suction nozzle is switched off.
Cycle
The duration of a cycle covers the time from the start of evacuation through ejection to the start of the
new evacuation (è Fig. 6)
1
2
3
2
4
5
In
Out A
Suction
1
2
3
Cycle
Evacuation time tevac
Air supply time tair
Fig. 6
4
5
Switch-on point Out A
Switch-off point Out A
Definition of cycle, example for Out A
Pressurisation and evacuation times
The minimum and maximum pressurisation and evacuation time are measured in the vacuum suction
nozzle. The values are lost if the vacuum suction nozzle is switched off.
Festo – OVEM – 1407c English
69