Download DMM 230 - Multimetrix

Chapter II
1.1.3 Symbols
According to WEEE directive 2002/96/EC
Refer to the user's manual
Risk of electric shock
Double insulation
1.1.4 Instructions
Before opening the instrument, disconnect it from the circuits to be
measured and make sure that you are not charged with static electricity,
which could irreparably damage the instrument's internal elements.
1.1.5 Cleaning
Disconnect external circuit leads and turn off the instrument. Clean with
a damp cloth and soap. Never use abrasive products or solvents.
Make sure the instrument is perfectly dry before using it again.
1.16 Protection factor (PF)/Humid Environment
This instrument has a PF67 protection factor, which means that it is
extremely waterproof and will not be damaged by water immersion
(when turned off).
However, the instrument and its accessories must be completely dry
(including inside measurement terminals) before being used again.
1.2
Guarantee
This equipment is guaranteed against any material or manufacturing
flaws, as specified in the general terms of sale.
During the guarantee period (1 year), the instrument can only be
repaired by the manufacturer, who reserves the right to repair the
instrument or to exchange all or part of it. If the equipment is returned to
the manufacturer, the outgoing transport costs are borne by the
customer.
DMM230
19