Download wireless smoke detector sd90

WIRELESS SMOKE DETECTOR SD90 OWNER’S MANUAL
For use with Haibrain security systems of the types:
•
•
•
•
•
•
SafeGuard
TotalGuard
HomeGuard MS8000
Security System MS9470, MS9770, MS9970
Security System Protector 28
Home Automation Controller SC2200, SC2700, SC2800, SC9000
Please read these instructions carefully and completely before initial activation; they contain
information for the correct installation of this wireless smoke alarm.
SAFETY WARNINGS
•
•
•
•
•
•
•
•
•
The SD90 is a smoke alarm that is exclusively designed for use in the home. The smoke alarm emits a
piercing sound when smoke is detected. Ensure that the smoke alarm is positioned in an area where
the built-in siren can be clearly heard, also when you are sleeping. Place additional smoke alarms if
necessary. You can also use the smoke alarm with Haibrain security systems to add extra functionality.
In this way it is possible to receive a telephone warning if the smoke alarm is activated. Please be
aware: the manufacturer is not responsible for use of this extra function.
Test your smoke alarm once a month.
To prevent short circuits, this product should only be used inside and only in dry spaces. Do not expose
the components to rain or moisture. Do not use the product close to a bath, swimming pool etc.
Do not expose the components of your systems to extremely high temperatures or bright light sources.
Do not open the product: the device contains live parts. The product should only be repaired or
serviced by a qualified repairman
In case of improper usage or if you have opened, altered and repaired the product yourself, all
guarantees expire. Haibrain does not accept responsibility in the case of improper usage of the
product or when the product is used for purposes other than specified. Haibrain does not accept
responsibility for additional damage other than covered by the legal product responsibility.
Do not use cleaning products when cleaning the alarm. Clean the alarm with a dry or slightly damp cloth.
Batteries: keep batteries out of the reach of children. Dispose of batteries as chemical waste. Never use
old and new batteries or different types of batteries together. Remove the batteries when you are not
using the system for a longer period of time.
Check the polarity (+/-) of the batteries when inserting them in the product. Wrong positioning can
cause an explosion.
TABLE OF CONTENTS
1.
2.
3.
4.
5.
6.
7.
General and function
Application
Positioning
Installation
Preparing for use
Registering the smoke detector with the SC9000 base station of the SafeGuard / TotalGuard
Registering the smoke detector with the base stations of the types MS9470, MS9770, MS9970,
SC2200, SC2700, SC2800, Protector 28
8. Registering the smoke detector with the base station of the type Homeguard MS8000
9. What happens when the alarm goes off?
10. Changing the battery
SD90 4
4
4
5
5
5
6
6
6
6
3