Download 2 - Sulky Burel

Transcript
Présentation / Presentation / Beschreibung
FR
C
13
Lors de la première utilisation du logiciel le bouton
n’est pas visible.
Deuxièmement Depuis le menu
Dans ce cas le système ajuste en continu le débit des trappes
pour conserver la dose par hectare programmée.
Activer
débit.
Le conducteur n’intervient pas sur le système de contrôle continu
du débit.
Il doit seulement programmer la dose par hectare souhaitée.
L’électronique va gérer en continu l’ajustement de la position des
trappes pour conserver la dose par hectare .
ou désactiver
le contrôle continu du
Avec un ravitailleur il faut :
- Activer
Pour des utilisations particulières par exemple avec un ravitailleur ou si le conducteur souhaite ne pas corriger en continu le
débit.
- Il faut depuis le menu « Advanced settings »
et calibration pesée,
,
pendant le transport sur route ou au rechargement.
- Ne pas utiliser le
1
lors du ravitaillement avec le
ravitailleur en roulant.
Le contrôle continu se met sur
lorsque le niveau de
trémie est ≤ 200 kg
Premièrement sélectionner le bouton
et le positionner sur
.
GB
C
13
When using the software for the first time, the
is not visible.
button
First select the
In this case, the system continuously adjusts the application rate
of the shutters in order to maintain the programmed application
rate per hectare.
The driver does not intervene on the continuous control system
of the application rate.
He only needs to program the desired application rate per
hectare.
The control unit will continuously manage the adjustment of
the shutter position in order to maintain the application rate per
hectare.
Second From the
Activate
,
.
menu
or deactivate
the continuous control of
the application rate.
With a tanker you must:
- Press
For special uses, with a tanker for example, or if the driver does
not want to continuously correct the application rate.
- From the “Advanced settings” menu
and weighing device calibration,
button and position it to
during road transport or when reloading.
- Do not use the
when refilling or while moving the tanker.
The continuous control switches to
when the hopper
level is ≤ 200 kg
DE
C
13
Bei der ersten Inbetriebnahme der Software ist die Schaltfläche
nicht sichtbar. In diesem Fall passt das System
kontinuierlich die Streuschieberöffnung an, um die
programmierte Hektardosierung beizubehalten.
Der Fahrer greift nicht in die kontinuierliche Streumengensteuerung
ein. Er muss nur die gewünschte Hektardosierung programmieren.
Die Elektronik reguliert kontinuierlich die Anpassung der Streuschieberöffnung, um die Hektardosierung beizubehalten.
Für besondere Nutzungen, zum Beispiel mit einem Versorger, oder
wenn der Fahrer keine kontinuierliche Korrektur der Hektardosierung wünscht:
- Von dem Menü „Advanced settings“
und
„Kalibrierung Wiegeergebnis“
Zweitens Von dem Menü
die kontinuierliche Steuerung der Hektardosierung aktivieren
bzw. inaktivieren
.
Mit einem Versorger müssen Sie:
-
- Den
beim Straßentransport oder beim Auffüllen aktivieren.
während der fahrenden Versorgung mit
dem Versorger nicht benutzen.
,
Erstens die Schaltfläche
drücken und diese auf
positionieren.
Die kontinuierliche Steuerung stellt sich auf
der Trichterfüllstand ≤ 200 kg erreicht
wenn
19