Download Anhang

Appendix
Chapter 9
Operating Instructions
DME4000
Parameter
ID
Parameter
Position Value
Current Value
7295 counts
Chapter 3 Menu
1
2
COS/Delta
0 counts
Anhang 0
3
0 counts
6
Position State
Register
Position Low
Limit
Position High
Limit
Offset Value
0 counts
See DeviceNet
Specification
See DeviceNet
Specification
See DeviceNet
Specification
3.6
7
Resolution
100 µm
3.5
8
19200
3.2.1
8n1
3.2.2
10
Serial Mode
Baudrate
Serial Mode
Data
Plausibility
Off
3.7
11
MF1 ActiveState
High
3.3.1
12
MF1 Function
Distance
3.3.2
13
MF2 ActiveState
High
3.4.1
14
MF2 Function
Service
3.4.2
15
Service MF1
1101110
3.3.4
16
Service MF2
1101110
3.4.4
17
MF1 Temperature
UpperLimit
MF1 Temperature
LowerLimit
MF2 Temperature
UpperLimit
MF2 Temperature
LowerLimit
MF1 Distance
UpperLimit
MF1 Distance
LowerLimit
MF2 Distance
UpperLimit
MF2 Distance
LowerLimit
70 °C
3.3.4.3
0 °C
3.3.4.4
70 °C
3.4.4.3
0 °C
3.4.4.4
2000 mm
3.3.3.1
1990 mm
3.3.3.2
2000 mm
3.4.3.1
1990 mm
3.4.3.2
4
5
9
18
19
20
21
22
23
24

CAUTION
0 counts
0 counts
Parametrisation of MF1 and MF2
Device variants DME4000–xx5 are only equipped with a 5-pin DeviceNet plug. The multifunctional
inputs and outputs MF1 and MF2 are not available as hardware.
The parametrisation of MF1 and MF2 is nevertheless possible, and the result can be queried in the
diagnostic byte (see Section 9.6.3 “Data Exchange”) via the bus.
Parametrisation as an input is not possible. The sleep mode and preset functions are possible via the
“Class Instance Editor”.
118
© SICK AG • Germany • Subject to change without notice
8014584/YHG5/2014-12