Download Flo-Station

Table of Contents
Specifications on page 3
Operation on page 16
General information on page 4
Maintenance on page 17
Installation on page 8
Troubleshooting on page 19
Startup on page 15
Replacement parts and accessories on page 19
Specifications
Specifications are subject to change without notice.
Specification
Details
Dimensions (W x D x L)
257.8 x 95.3 x 236.7 mm (10.15 x 3.75 x 9.2 in.)
Enclosure
ABS plastic
Weight
2.3 kg (5 lb)
Pollution degree
2
Installation category
II
Power requirements
AC: 100–230 VAC, 50/60 Hz, 22/14 mA (with all loads used)
DC: 12 VDC without display, 12 VDC with display and the backlight off, 180 mA
(2.1 watts) with one 4–20 mA output used
Fuse (AC model)
One 5 x 20 mm, 1 A, 250 VAC, antisurge
Operating conditions
Temperature: –20 to 50 °C (–4 to 122 °F) without display, –10 to 50 °C (14 to
122 °F) with display
Maximum relative humidity 80% for temperatures up to 31 °C (88 °F) decreasing
linearly to 50% relative humidity at 50 °C (122 °F).
Altitude: 2000 m (6,560 ft) maximum
Storage conditions
–40 to 60° C (–40 to 140 °F) without display, –20 to 60° C (4 to 140 °F) with
display
Data storage
64 kB (16 k cycles of velocity/level data)
Communication
RS232C at 19.2 K Baud
Display (optional)
25.4 x 76.2 mm (1 x 3 in.), four lines of text
The data shown on the display is configurable. By default, the display shows the
flow, velocity, level, totalized flow and other channels.
Accuracy
1 second per day
Analog outputs
Four 4–20 mA outputs, system isolated, 600 ohm load maximum
22–18 AWG wire
Relay
One dry relay contact, single pole, normally open pole contact
1 A @ 30 VDC (resistive) maximum
22–18 AWG wire
Output power
12 VDC, 150 mA to external devices
Analog input for data logging 0 to +5 VDC from an external device
Setup/Data retrieval
Flo-Ware for Windows software
Warranty
EU: 2 years, ROW: 1 year
English 3