Download CPSET-M20 - Leuze electronic

Transcript
Installation
6.3.1 Mounting on the side slot
Fix
•
the cast components of the MMS-AP-N60 mounting set included with delivery with two screws and sliding
nuts each on a side slot of the devices.
•
the angled rod with the shorter part to the two screws on the cast component.
•
the reflector on the passive side on the rod.
•
the light barrier with the mounting set on the rod on the transceiver side.
Fig. 6.3-1
Mounting light barrier and reflector with MMS-AP-N60 on a side slot
6.3.2 Mounting on the machine
Fix
•
the round rod bracket of the MMS-AP-N60 mounting set included with delivery with two screws each with
drill holes on the machine.
•
the angled round rod with the two screws on the round rod bracket.
•
the reflector on the passive side with CPM500/2V on the round rods.
•
the light barrier with the mounting set on the round rod on the transceiver side.
Fig. 6.3-1
Leuze electronic
Mounting light barrier and reflector with MMS-AP-N60 on the transport unit
CPSET-M20
31