Download QuickField 5.6 User Guide

How to Create a Circuit
87
Specifying Properties for Circuit Components
To set properties for circuit component:
•
•
•
double click the component in the schema, or
select the component and click Properties in the Edit menu, or
right click the component and choose Properties from context menu.
Specifying Properties for Electric Components
For electric components, you can set the following properties:
Label. You can change the label for the component. It is not necessary to change this
property, because you can use the default label names. But meaningful label names
improve the model clarity and therefore recommended. Label names should be unique
within the circuit.
Value. Depending on component type, you should specify its numeric value:
resistance R, capacity C, inductance L, current I or voltage V.
For currrent and voltage sources you can specify formula as a value. For transient
problems, you can specify formula containing t (time).
φ (phase). For AC problems, for voltage sources and current sources, you should
specify phase value here.
Properties for components representing model blocks
For components representing model blocks, you can set the following property:
Block. You may change the name of the QuickField block in this field. Combo box
provides the list of all blocks that should be added to the circuit, that is, the list of all
solid conductors of the model. Each block can be specified only once.