Download Sweeper 7100 Cleanstar basic Operating Instructions

1. Safety Instructions
1
If clogging occurs in the brushes or in
the implement, turn off the engine and
clean the brushes or the implement with
an appropriate tool.
Implements
In case of damage to the sweeper or to
the implement, immediately turn off the
engine and have it repaired.
Always use appropriate tools and wear
gloves when changing implements and
parts thereof.
If steering causes problems, immediately bring the sweeper to a halt and turn
it off. Have the malfunction removed
without delay.
For mounting and dismounting implements bring stands into proper position
and ensure stability.
To prevent the sweeper from sliding on
slopes, make sure it is secured by another person using a bar or a rope. This
person must be located at a higher position than the vehicle and at a safe distance from the attachment at work.
If possible, always work horizontally on
the slope.
End of Operation
Only mount implements with the engine
and the implement drive switched off.
Secure sweeper and implements
against rolling off (wheel chocks).
Beware of injuries while coupling implements.
Mount implements as specified and only
couple at specified points.
Secure sweeper and implement against
unauthorized use and rolling off when
you leave the machine. If necessary, install transport or security devices and
secure.
Never leave the sweeper unattended
with the engine running.
Weights
Before you leave the sweeper, turn off
the engine.
Always fit weights onto appropriate
weight mounting devices.
Secure sweeper against unauthorized
use - remove spark plug connector.
Snow Clearing
Ensure snow dozer is mounted correctly! Wear slip-proof shoes.
When pivoting the snow dozer watch out
for crush and shear points. Adjust working speed to conditions. Operator may
be injured when the machine hits an
obstacle.
10
agria Sweeper 7100 Cleanstar basic