Download User's manual

Installation
Installation
Make sure to review the mounting precautions thoroughly prior to installation (dashboard attachment recommended).
2
Fix the mount on the urethane sticker by pressing on it.
1
Adhere the suction cup on the sticker and press vertically to remove air.
Press the fixing lever until you hear a click sound.
Wipe and clean the area and then
affix the mount to the windscreen in a
position that does not interfere with the
driver’s view.
2
Adjust the height.
Turn the compression lever in the direction of
the arrow until you hear a clicking sound.
3
6
14
Wipe and clean the
area and then affix the
urethane sticker on
the dashboard.
Adjust the height.
Once the mount is
firmly fixed, affix the
ThinkNavi T7 main
unit.
4
7
Adjust the angle and
fasten both screws in
the opposite direction
to fix the mount
tightly.
Check to see that the
ThinkNavi T7 main
unit and mounting
unit are securely
fastened.
5
Adjust the angle and
fasten the screw in the
direction of the arrow.
3
Attach the ThinkNavi T7 main unit
securely to the mount. Make sure that
the main unit is attached correctly.
Refer to 4 and 5 on page 14 for adjusting angle
and securing the mount.
8
Connect the unit to
the power adapter
(cigarette-lighter port)
and ThinkNavi T7 will
be ready to use.
4
Getting Ready I Installation
Getting Ready I Installation
1
Windscreen Attachment
01
01
Dashboard Attachment
Connect the unit to the power
adapter (cigarette-lighter port)
and ThinkNavi T7 will be ready to
use.
15