Download SLURM V2.2 - User's Guide

Transcript
4.3
Restoring SLURM High Availability following a Primary
Management Node crash
SLURM High Availability has to be restored following the crash of the Primary Management
Node, and SLURM is running on the Secondary Management Node. This is done as
follows:
1.
Restart HA Cluster Suite on the Primary Node:
storioha -c start
2.
Wait a few seconds and check that HA Cluster Suite is available by using the clustat
command.
3.
Mount the SLURM shared storage on the Primary Management Node, by running the
command below:
mount LABEL=HA_MGMT:SLURM /gfs2shared/slurmdata
4.
Launch SLURM on the Primary Management Node:
service slurm start
5.
36
Wait a minute and check that SLURM is running on both Management Nodes.
SLURM V2.2 - User's Guide