Download 100 mm graphics recorder User guide

100 MM GRAPHICS RECORDER: USER GUIDE
3.4 DISPLAY MODES (Cont.)
3.4.5 Numeric
Entered from Horizontal bargraph mode by means of the root menu 'Cycle' key, this display mode shows the Process
Variable (PV) values as digital values. The format (which is automatically selected) is based on the number of channels in the display group. Figures 3.4.5a and 3.4.5b, show typical examples of the one column (up to four channels)
and two column versions (five or six channels) of this display mode, respectively. Within each version, the process
variable display areas expand or contract to fill the screen. Review mode is not available from this display mode.
A further operation of the Cycle key in the Root menu returns to Vertical Trend Display mode described above.
Group Name
Engineer
99%
11:19:30
02/01/01
Channel 1
12.21
C
23.32
C
34.43
C
45.54
C
Channel 2
Channel 3
Channel 4
Figure 3.4.5a Numeric display mode (1 to 4 channels)
Engineer
Group Name
Channel 1
99%
11:00:24
02/01/01
Channel 2
12.34
C
Channel 3
23.45
C
45.67
C
Channel 4
34.56
C
56.78
C
Channel 5
Figure 3.4.5b Numeric display mode (5 or 6 channels)
Page 24
HA027271
Issue 1 Feb 01