Download PBS Professional User's Guide

Transcript
Multiprocessor Jobs
10.6.7.2
Chapter 10
MPD Startup and Shutdown
The script starts MPD daemons on each of the unique hosts listed in
$PBS_NODEFILE, using either the rsh or ssh method based on the
value of the environment variable RSHCOMMAND. The default is rsh.
The script also takes care of shutting down the MPD daemons at the end of
a run.
If the MPD daemons are not running, the PBS interface to mpirun.mpd
will start GM's MPD daemons as this user on the allocated PBS hosts. The
MPD daemons may have been started already by the administrator or by
the user. MPD daemons are not started inside a PBS prologue script since
it won't have the path of mpirun.mpd that the user executed (GM or
MX), which would determine the path to the MPD binary.
10.6.7.3
Examples
Example 1: Run a single-executable MPICH-GM job with 64 processes
spread out across the PBS-allocated hosts listed in $PBS_NODEFILE:
PBS_NODEFILE:
pbs-host1
pbs-host2
pbs-host3
qsub -l select=3:ncpus=1
[MPICH-GM-HOME]/bin/mpirun.mpd -np 64 /path/myprog.x
1200
^D
<job-id>
If the GM MPD daemons are not running, the PBS interface to
mpirun.mpd will start them as this user on the allocated PBS hosts.
The daemons may have been previously started by the administrator or
the user.
PBS Professional 10.4 User’s Guide
247