Download SERVICE MANUAL - Pdfstream.manualsonline.com
Transcript
< Installing Procedure > (1) Secure the Laser unit with the six cup S M3x6 Taptite screws. (2) Put the Flat cable (LD harness connector) through the Core. (3) Put the Flat cable (Polygon motor connector) through the Core and Protective film. (Refer to "7. HARNESS ROUTING" in Chapter 5.) (4) Connect the two Flat cables to the Main PCB. Note : • When connecting flat cable(s), do not insert them at an angle. After insertion, check that the cables are not at an angle. Laser unit LD harness (Flat cable) Taptite cup S M3x6 Core Protective film Taptite cup S M3x6 Polygon motor (Flat cable) Core Laser unit LD harness (Flat cable) Main PCB Polygon motor (Flat cable) Main PCB Protective film Fig. 4-23 4-16 Confidential
Related documents
SERVICE MANUAL
1 DIALOG 26XX SERIES DIGITAL TELEPHONE USER GUIDE
Braille Lite M20 & M40 User Manual
do WinSAMM - MCDI do Brasil
Precaución - Diagramasde.com - Diagramas electronicos y
NS-Runtime Software User`s Manual
Brother DCP-7057 Service manual
Ricoh SP 1200S Service manual
NS-Runtime Software USER'S MANUAL
Brother HL-L2361DN Service manual
Brother HL-5450DNT Service manual