Download Gemini User Guide - Ag Tech Services
Transcript
10 The Field-IQ Plugin Flow Calibration From the Field-IQ Calibration screen, select Flow Calibration under the valve you want to calibrate. The Planter Calibration screen appears: 1. In the Calibrate tab, enter the following: Setting Description Seeds Per Disk The number of seed openings per disk plate. Shaft Encoder Constant Pulses per revolution. Calibration Constant A calculated value that the system determines during calibration. This field allows you to adjust for inconsistencies in the seed meters. To start out, leave the value at 1.000. After the calibration test, the system may adjust this number. Test Follow the on-screen insttructions to test the settings you entered. 2 50 FmX Integrated Display User Guide
Related documents
FmX Integrated Display User Guide
FmX Integrated Display User Guide
CNH FM-1000 Integrated Display
User Guide V4 - Kucera Farm Supply
FmX Integrated Display User Guide
Field Manager DisplayUser Guide
FM-1000 Integrated Display User Guide 9.25A
Gemini User Guide
FmX Integrated Display User Guide
FM-750 User Manual v7.0
Gemini User Guide
Trimble CFX-750 Display