Download CML User's Guide
Transcript
Chapter 3 Setting by Parameter K69 S-Curve gain Unit : ― This parameter sets the S-curve gain in positioning. By setting S-curve, the form of target speed for acceleration and deceleration periods will be S-shaped according to its gain. Therefore it may effect a Min Max smoother positioning or vibration reduction. When 0, motor makes a trapezoidal motion. [Setting Example] K69.1=0 Target Speed Trapezoidal Motion 㪫㫀㫄㪼 K69.1=1024 S-curve Motion Target Speed 㪫㫀㫄㪼 067 0 1024