Download CGN3RES

Hitron CGN3 User’s Guide
Push-Button Configuration (PBC): when the user presses the PBC button on
the AP (either a physical button, or a virtual button in the GUI), any user of a
wireless client that supports WPS can press the corresponding PBC button on
the client within two minutes to join the network.
Personal Identification Number (PIN) Configuration: all WPS-capable
devices possess a PIN (usually to be found printed on a sticker on the device’s
housing). When you configure another device to use the same PIN, the two
devices authenticate with one another.
Once authenticated, devices that have joined a network via WPS use the WPA2
security standard.
5.1.6 WMM
WiFi MultiMedia (WMM) is a Quality of Service (QoS) enhancement that allows
prioritization of certain types of data over the wireless network. WMM provides four
data type classifications (in priority order; highest to lowest):
Voice
Video
Best effort
Background
If you wish to improve the performance of voice and video (at the expense of other,
less time-sensitive applications such as Internet browsing and FTP transfers), you
can enable WMM. You can also edit the WMM QoS parameters, but are disadvised
to do so unless you have an extremely good reason to make the changes.
5.1.7 Guest Networks
Your CGN3 supports the creation of a wireless guest network. A guest network
enables you to allow temporary visitors to access your wireless Internet connection
without revealing your primary network password(s). Computers connected to the
guest network can access the Internet connection only, and have no access to other
computers or devices on the wireless or wired network.
69
Version
Version 1.1,
1.1, 08/2013.
08/2013. Copyright
Copyright
2012
2013 Hitron Technologies