Download USER MANUAL PSPC
Transcript
OPERATION PRODUCT CHANGE OVER 9 CHANGE OVER TO 30 TRAY Follow below steps to prepare the system for running the 30-tray: 9 1. First wait until no more eggs are supplied on the egg-collecting conveyor. 2. Set the clear selection switch to 1. 3. Wait until all eggs are placed into the trays. No more eggs should be present inside the system. 4. Set the clear selection switch back to 0. 5. Push the stop button. 6. Wait until all movements of the system are stopped. 7. Set the denester selection switch to OFF. 8. Set the tray selection switch to the 30-cell tray. 9. Pull the 30 cell tray guides up and slide them towards the end of the conveyor for guiding the 30 cell trays. 10. Fill the 30-cell denester bunker with the 30-cell trays. Place the trays with the tray grip pointing towards the side of the output conveyor. 10 TIP! When the trays in the stack are packed tightly into each other, knock the stack loose before filling the bunkers denester. 12 12 UM-PSPC-01-E/03-2008 11. Set the denester selection switch to ON. 12. Place the 5 suction cups onto the vacuum head to have 5x6 suction cups. 13. Support the vacuum head while pushing the suction cups onto the nipples. Make sure the suction cups are completely onto the nipples and are pointing straight downward. 14. Push the start button to start the system. 15. Now the system is running with the 30-cell trays. 13 USER MANAUL PSPC Page 45 of 93