Transcript
USER GUIDE FIXATION & P.O.S. SOLUTIONS ALL ROUND VERY IMPORTANT: Ensure that the surface is flat, nonporous, and clean. Works best on surfaces made of glass, metal, lacquered wood, and mirrors. The use is expected for a period of 2 or 3 weeks. Afterwards we suggest to remove the suction cup and remount in order to vacuum out the air. 1 2 3 1. Clean and slightly moisten the suction cup (if necessary) before sticking it to the surface. 2. Place the suction cup on the chosen surface, with the lock tab facing upward. 3. Firmly press down and hold down the suction cup, then push the tab in order to vacuum out the air. 4 5 6 7 8 7 and 8. If you wish, you can unclip your accessory from the suction cup. Simply insert a sharp, pointed object (such as a pen, a screwdriver, etc.) into the space between suction cup and accessory and push gently outwards. For storage, be sure to keep the flexible portion of the suction cup in a flat position to avoid distortion of the product. 09 363 93 60 09 362 23 80 www.all-round.be User guide 4 and 5. Ensure that the suction cup is well attached. You can then clip your accessory onto the suction cup. 6. To remove the suction cup, simply pull the tab in the opposite direction. Proceed by unsticking the suction cup from the surface using the tab placed on the flexible portion of the cup. [email protected]
