Download V1.10 User Guide

New Channel Display Graphics
Fadersense Mode
Isolated Fader Bay Sense Mode
With the Fadersense mode enabled, you can also quickly
identify which channel within an isolated bay is ‘in access’. For
example:
1. Isolate a fader bay by pressing the ON button located on
the ISO BAY access panel:
The 8 fader strips within the bay are now isolated from the
centre section’s BANK and LAYER access buttons.
2. Select the DSP module you wish to control – for
example, select EQ by pressing the EQ DISP button:
3. And select the channel you wish to adjust by pressing its
fader SEL button.
The channel ‘in access’ is now highlighted on the Channel
display with a coloured outline. As before, the colour of the
outline matches the type of input, so white for an input channel,
red for a sum, etc.
mc2 V1.10 User Guide
V1.0
21/ 34