Download ILOG AMPL CPLEX System Version 8.1 User's Guide
Transcript
SENSITIVITY RANGING Sensitivity ranging When the sensitivity directive (described in Directives for controlling output on page 43) is included in CPLEX's option list, classical sensitivity ranges are computed and are returned in the following three suffixes: .current .down .up Let us illustrate the use of these suffixes using an example model from Section 4.3 of the AMPL book: ampl: ampl: ampl: ampl: ampl: model steelT.mod; data steelT.dat; option solver cplexamp; option cplex_options 'sensitivity'; solve; suffix up OUT; suffix down OUT; suffix current OUT; The three lines at the end show the suffix commands executed by AMPL in response to the results from CPLEX. These commands are invoked automatically; you do not need to type them. For variables, suffix .current indicates the objective function coefficient in the current problem, while .down and .up give the smallest and largest values of the objective coefficient for which the current simplex basis remains optimal. (CPLEX returns -1e+20 for .down and 1e+20 for .up to indicate minus infinity and plus infinity, respectively.) ampl: display Sell.down, Sell.current, ampl? Sell.up; : bands bands bands bands coils coils coils coils ; 1 2 3 4 1 2 3 4 Sell.down Sell.current 23.3 25 25.4 26 24.9 27 10 27 29.2857 30 33 35 35.2857 37 35.2857 39 Sell.up 1e+20 1e+20 27.5 29.1 30.8571 1e+20 1e+20 1e+20 := ILOG AMPL CPLEX SYSTEM 8.1 — USER’S GUIDE 67 Defined Suffixes for CPLEX CPLEX 8.1: sensitivity CPLEX 8.1: optimal solution; objective 515033 18 iterations (1 in phase I)