Download IPM3400 Compact Power Meter User guide

IA Networks Technology
IPM3400 User Guide
Chapter 1 Introduction
1.1 Product Introduction
IPM3400 series are designed for general single phase or poly phase power measurement, with wide
range. it con be applied either on low voltage primary side or medium/high voltage secondary side for
its high accuracy (<1%, IEC62053-21) under 5A current. IPM3400 equipped with clip-on CT, standard
communication, small size and low cost.
Features：
1. True RMS energy and power parameters measurement in compact size。
2. clip-on CT, easy wiring for on-line installation。
3. RS485 communication support Modbus protocol。
4. Wh accuracy better than 0.5%(pf =1)。
5. Support Lon Talks (option)。
6. wild range of measurement with various size of CT , up to 200A(24Φmm) 。
7. LED pulse output。
1.2 Caution
1.2.1 Danger
The meter contains hazardous voltages. The meter should never be disassembled. Failure
to observe this practice can result in serious injury or death. Any work on or near energized
meters, meter sockets, or other metering equipment can present a danger of electrical
shock. It is strongly recommended that all work should be performed only by qualified
industrial electricians and metering specialist. IA Networks assumes no responsibility if your
electrical installer does not follow the appropriate national and local electrical codes.
1.2.2 PRODUCT WARRANTY & CUSTOMER SUPPORT
IA Networks warrants all products free from defects in material and workmanship for a
period of one year from the date of shipping. During the warranty period, we will, at our
position, either repair any product that proves to be defective. To report any defect, please
contact ：+886-2-23953153 or [email protected].
Please have the model, serial number and a detailed problem description available when
you call. If the problem concerns a particular reading, please have all meter readings
available. When returning any merchandise to IA Networks, a return SN. is required.
1.2.3 LIMITATION OF WARRANTY
This warranty does not apply to defects resulting from unauthorized modification, misuse,
or use for reason other than electrical power monitoring. The supplied meter is not a
user-serviceable product.
4