Download TMS320C6x C Source Debugger User's Guide

Transcript
Creating or Modifying the Memory Map
Deleting a range of memory
To delete a range of memory, follow these steps:
1) Select Mapping from the Memory menu. This displays the Memory Map
Control dialog box.
2) From the list of defined ranges at the top of the dialog box, select the range
that you want to delete.
3) Click Delete.
4) Click OK.
Before you can delete a memory address used as a simulated I/O port from
the memory map, you must disconnect the address. See the Disconnecting
an I/O port section on page 4-15 for information.
Modifying a defined range of memory
To modify a defined range of memory, follow these steps:
1) Select Mapping from the Memory menu. This displays the Memory Map
Control dialog box.
2) From the list of defined ranges at the top of the dialog box, select the range
that you want to modify.
3) In the Memory Type, Start, Length, Attribute and/or Wait states fields,
make the appropriate changes.
4) Click Apply.
5) Click OK.
4-6