Download USER'S MANUAL TTP-2410M/346M TTP

3.1.4 Ethernet
Use this menu to configure internal Ethernet configuration check the printer’s Ethernet
module status, and reset the Ethernet module. This function is available on the LCD
display when Ethernet card is installed.
and
buttons to select the different options, and press
Press
button to enter the option. Press
key to cancel the setting and return to the
previous menu.
Ethernet
Status
↓
IP Address
↓
MAC
↓
Protocol
↓
Exit
Configure
↓
DHCP
↓
Static IP
↓
Reset
Exit
Exit
Note:
This function is available for TTP-2410M series only and option for TTP-246M Plus
series.
3.1.4.1 Status: (IP Address / MAC Address/ Protocol)
Use this menu to check the Ethernet setting status.
3.1.4.1.1 IP Address
Ethernet
1/4
Status
> Status
> IP Address
1/4
Last Used IP
0.0.0.0
Configure
MAC
Configured IP
Reset
Protocol
0.0.0.0
The IP address information will be shown on the LCD display. Please press
botton to return to the previous menu.
35