Download User's Manual

Transcript
39
NED
4.10 Setting Gain
The camera can adjust the analog gain (x1 to X11.2 in 21 steps) and the digital
gain. As the diagram below indicates, increasing the gain setting increases the
slope of the camera’s response curve and results in a higher camera output for a
given amount of light.
Analog gain can be changed by sending the ”gax” command.
Digital gain can be changed by sending the “gdx” command.
Output
Fs : Saturation Output
(a<b<c)
Fs
Gain a
Gain b
Gain c
Amount of Incident
Light (lx s)
Figure 4-10-1 PGA Gain Adjustment
Gain and noise values are proportionally related.
Adjust amount of gain in accordance with the requirements of your camera
system.
8040SAT8
UME-0005-01