Download User's Manual
Transcript
39 NED 4.10 Setting Gain The camera can adjust the analog gain (x1 to X11.2 in 21 steps) and the digital gain. As the diagram below indicates, increasing the gain setting increases the slope of the camera’s response curve and results in a higher camera output for a given amount of light. Analog gain can be changed by sending the ”gax” command. Digital gain can be changed by sending the “gdx” command. Output Fs : Saturation Output (a<b<c) Fs Gain a Gain b Gain c Amount of Incident Light (lx s) Figure 4-10-1 PGA Gain Adjustment Gain and noise values are proportionally related. Adjust amount of gain in accordance with the requirements of your camera system. 8040SAT8 UME-0005-01