Download Seed Rate Controller Operators Manual
Transcript
Seed Rate Controller Operators Manual Tank Calibration (Liquid) 1 4 In this example, Tank 3 has been set to contain liquid product 1. Click (Tap) ‘Tank 3 Icon’ of the Liquid Tank. A ‘Tank Setup’ screen will appear. 2. Click (Tap) the ‘Cal 3’ button. A ‘CALIBRATE TANK3’ screen will appear and the ‘Manual Speed’ will be enabled automatically, on the Working Screen. Manual Entry of Calibration Factor Note the ‘Cal Factor’ on the Flow meter and the units used (example: litres or gallons). 4. Select the Calculator Icon next to the ‘Manual Entry’ and enter the ‘Cal Factor’. Then press the ENTER button to save the value. The current ‘Cal Factor’ will be displayed. A2678 Rev 1.4 7-17