Download Seed Rate Controller Operators Manual

Transcript
Seed Rate Controller Operators Manual
Tank Calibration (Liquid)
1
4
In this example, Tank 3 has been set to contain liquid product
1. Click (Tap) ‘Tank 3 Icon’ of the Liquid Tank. A ‘Tank
Setup’ screen will appear.
2. Click (Tap) the ‘Cal 3’ button. A ‘CALIBRATE TANK3’
screen will appear and the ‘Manual Speed’ will be enabled
automatically, on the Working Screen.
Manual Entry of Calibration Factor
Note the ‘Cal Factor’ on the Flow meter and the units used
(example: litres or gallons).
4. Select the Calculator Icon next to the ‘Manual Entry’ and
enter the ‘Cal Factor’. Then press the ENTER button to
save the value. The current ‘Cal Factor’ will be displayed.
A2678 Rev 1.4
7-17