Download Seed Rate Controller Operators Manual

Seed Rate Controller Operators Manual
Product- Displays ‘NH3’ and this can’t be changed when NH3
is selected as the tank.
Tank Switch ON/OFF- This switches the individual tanks ON
or OFF, by selecting the ‘OFF’. When the Tank Switch and
Tank Icon is ‘grey out’ then the Tank Switch is switched OFF.
If the Tank Switch and Tank Icon is highlighted in ‘orange’, the
Tank Switch is ON.
Flow/Min- displays the current ‘weight of Nitrogen (N)’
dispensed per minute, as read by the flow meter.
Cal. Factor- displays the Calibration Factor for the flow meter
for the liquid tank.
Range- displays the PWM range (as a %) of the proportional
valve of the selected tank while seeding.
Flow/Noz- displays the current flow per nozzle. The number
of nozzles is entered into Section 4.2. This value is the actual
flow rate as read by the flow meter divided by the number of
nozzles.
A2678 Rev 1.4
7-21