Download TRF-2470 User Guide

ii
Quick Setup in five easy steps
1. Connect the antenna to ANT IN on the back of the PVR unit.
2. Connect your desired audio-video cables from the back
of the PVR unit to the back of the television.
(Composite, Component, HDMI)
3. Plug into the power point and turn the unit ON using
the switch on the back of the unit.
4. Switch television ON, then use the television remote to
select the correct video input channel for the PVR unit.
(for example, AV1, AV2, Component, HDMI, etc)
5. On the main menu go to Installation/Searching then
scroll to Start Search, press OK .
Wait till progress bar on bottom of screen reaches 100 %
then press OK to save and EXIT .