Transcript
RideCase (works with iPhone 4 / 4S) User's Guide GB (Stem Cap Mount) WARNING (Handlebar Mount) Stem Cap Mount is not recommended for use with carbon fiber or 1.5" steerer tubes. 35mm Bolt 18mm 35mm Shield Protective Sheet Preset RideCase Mount Case Important Note : 18mm Bolt • Due to the precise tolerance fit of RideCase with iPhone 4/4S, any protective film on the back and sides must be removed before installing RideCase or your iPhone 4/4S may be damaged by inadvertent release from RideCase while riding. • Make sure to install iPhone in RideCase first before mounting on RideCase Mount. • Recommended to use with RideCase Shield while riding. • Make sure to remove iPhone from RideCase Mount before adjusting mount angle. 1 2 18mm Bolt Tool Required : 4mm / 5 mm Allen key USE AS A REGULAR iPHONE CASE A. Install iPhone on case B. Remove iPhone from case Insert lower portion of iPhone in RideCase. Use thumbs to snap top of iPhone into RideCase and listen for audible click. Check that metal corners of iPhone are installed under plastic RideCase frame. 1 2 2 1 CLICK 1 2 INSTALL RIDECASE MOUNT ON STEM CAP 2 5mm Allen Key 5mm Allen Key 1 Logo facing forward 35mm Bolt Remove stem cap and replace with the RiceCase Mount. Recommended Torque Preset NOTE : Make sure to remove iPhone from RideCase mount before adjusting mount angle. 5 Nm INSTALL RIDECASE MOUNT ON HANDLEBAR OR STEM 5mm Allen Key 1 2 18mm Bolt 4mm Allen key INSTALL iPHONE ONTO RIDECASE MOUNT REMOVE iPHONE FROM RIDECASE MOUNT Install iPhone/RideCase assembly on RideCase Mount until an audible click is heard. Slide iPhone/RideCase assembly back and forth to insure that it is firmly fixed on the RideCase Mount. Press Release Button to remove iPhone from RideCase Mount. 2 1 ROTATION ADJUSTABLE -90º INSTALL SHIELD 90º Release Button CLICK PRESS OPTIONAL ACCESSORIES SPARE PARTS PanoBike Heart Rate Monitor PanoBike Speed & Cadence Sensor Topeak PanoBike App (For iPhone 4 / 4S / 5) (For iPhone 4S / 5) (For iPhone 4S / 5) (For iPhone 4S / 5) Art No. TMS-SP96 Art No. TPB-HRM01 Art No. TPB-CS01 Mobile PowerPack 5200mAh RideCase Mount Art No. TC1021 WARRANTY 2-year Warranty: All mechanical components against manufacturer defects only. Warranty Claim Requirements To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins on the date of manufacture. All warranties will be void if the product is damaged due to user crash, abuse, system alteration, modification, or used in any way not intended as described in this manual. * The specifications and design are subject to change without notice. Please contact your Topeak dealer with any questions. For USA customer service call : 1-800-250-3068 www.topeak.com Copyright © Topeak, Inc. 2012 * Bluetooth® is a registered trademark of Bluetooth SIG, Inc. * iPhone is a registered trademark of Apple Inc. TT9832-GB 10/12 * App Store is a service mark of Apple Inc.